Hans Schmidt Force Gauge - EgeRate Elektronik https://www.egerate.com Tue, 25 Apr 2023 08:05:39 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans Schmidt Force Gauge - EgeRate Elektronik https://www.egerate.com 32 32 PSH Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/psh-force-gauge/ Tue, 25 Apr 2023 07:37:10 +0000 https://www.egerate.com/?post_type=product&p=13667 4 measuring ranges available
from 0 - 500 N up to 0 - 3000 N
Analog force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry

Force measuring device for high forces, with high accuracy for exact measurements Accuracy ±0.1 % Full Scale

Simple, rugged, maintenace-free force measuring device

The post PSH
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak mode – to measure the peak force during a test (memory pointer)
  • Easy operation at high forces with additional handles
  • Highest accuracy for high forces with ±0,1 % full scale
  • Easy to use
  • Force gauge PSH with easy to read dial
  • Force gauge with zero tare ring to zero the gauge in each position (necessary, if heavy clamps are mounted)
  • Free manufacturers calibration report

Standard Features

  • Simple, rugged, maintenance-free force measuring device
  • Force gauge with rugged die-cast aluminium housing for heavy usage
  • For hand-held use or mounting on test stands (mounting thread 4 x M10 x 1 in the back)
  • Full set of accessories included

 Available Models

Model Capacity Resolution
PSH-500N 0 – 500 N 5 N
PSH-1000N 0 – 1000 N 10 N
PSH-2000N 0 – 2000 N 20 N
PSH-3000N 0 – 3000 N 25 N

The post PSH
Force Gauge first appeared on EgeRate Elektronik.

]]> PS Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/ps-force-gauge/ Tue, 25 Apr 2023 06:41:54 +0000 https://www.egerate.com/?post_type=product&p=13636 10 tension ranges available
from 0 - 5 N up to 0 - 500 N
Analog force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry

Force measuring device for high forces, with high accuracy for exact measurements Accuracy ±0.1 % Full Scale

Simple, rugged, maintenance-free force gauge

The post PS
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak mode – to measure the peak force during a test (memory pointer)
  • Highest accuracy for high forces with ±0,1 % full scale
  • Easy to use
  • Force gauge PS with easy to read dial
  • Force gauge with zero tare ring to zero the gauge in each position (necessary, if heavy clamps are mounted)
  • Free manufacturers calibration report

Standard Features

  • Simple, rugged, maintenance-free force measuring device
  • Force gauge with rugged die-cast aluminium housing for heavy usage
  • For hand-held use or mounting on test stands (mounting thread 4 x M4 in the back)
  • Full set of accessories included

 Available Models

Model Capacity Resolution
PS-5N 0 – 5 N 0.05 N
PS-10N 0 – 10 N 0.1 N
PS-20N 0 – 20 N 0.2 N
PS-30N 0 – 30 N 0.25 N
PS-50N 0 – 50 N 0.5 N
PS-100N 0 – 100 N 1 N
PS-200N 0 – 200 N 2 N
PS-300N 0 – 300 N 2.5 N
PS-400N 0 – 400 N 4 N
PS-500N 0 – 500 N 5 N

The post PS
Force Gauge first appeared on EgeRate Elektronik.

]]> FB Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/fb-force-gauge/ Mon, 24 Apr 2023 14:26:34 +0000 https://www.egerate.com/?post_type=product&p=13620 9 measuring ranges available
from 0 - 10 N up to 0 - 500 N
Analog force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry

Low cost force measuring device for a wide variety of applications accuracy ±0.3 % F.S.

The most popular force gauge

The post FB
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak mode – to measure the peak force during a test (memory pointer)
  • Highest accuracy for high forces with ±0,3 % full scale
  • Easy to use
  • Force gauge FB with easy to read dial
  • Force gauge with zero tare ring to zero the gauge in each position (necessary, if heavy clamps are mounted)
  • Free manufacturers calibration report
  • Standard Features
  • Simple, rugged, maintenance-free force measuring device
  • Force gauge FB with rugged die-cast aluminium housing for heavy usage
  • For hand-held use or mounting on test stands (mounting thread 4 x M4 in the back)
  • Full set of accessories included

 Available Models

Model Capacity Resolution
FB-10N 0 – 10 N 0.1 N
FB-20N 0 – 20 N 0.2 N
FB-30N 0 – 30 N 0.25 N
FB-50N 0 – 50 N 0.5 N
FB-100N 0 – 100 N 1 N
FB-200N 0 – 200 N 2 N
FB-300N 0 – 300 N 2.5 N
FB-400N 0 – 400 N 4 N
FB-500N 0 – 500 N 5 N

The post FB
Force Gauge first appeared on EgeRate Elektronik.

]]> FGJN Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/fgjn-force-gauge/ Mon, 24 Apr 2023 13:31:28 +0000 https://www.egerate.com/?post_type=product&p=13602 4 measuring ranges available
from 0 - 20.00 N up to 0 - 500.0 N
Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry at a good cost-performance ratio

Compact, low cost unit with high measuring frequency for exact acquire of peak values, without interface

The post FGJN
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak mode – to measure the peak force during a test
  • Force gauge FGJN with high sampling rate of 1000 times/sec for exact acquisition of peak values
  • »Zero Set« to zero the gauge in all operating positions
  • Force gauge with user switchable units: N, kgf and lbf
  • User selectable display update time
  • Display can be reversed for inverted use; e.g. on vertical test stands

Standard Features

  • Force measuring device for exact measuring with an accuracy of 0.2 %
  • 200 % overload protection
  • Force gauge with easy to read LCD display
  • For hand-held use or mounting on test stands (mounting thread 4 x M4 in the back)
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Operates on rechargeable battery and/or AC adapter
  • Certificate of Compliance with the order 2.1 is included
  • Full set of accessories included

 Available Models

Model Capacity Resolution Capacity kgf Capacity lbf
FGJN-2 0 – 20.00 N 0.01 N 0 – 2.000 kgf 0 – 4.400 lbf
FGJN-5 0 – 50.00 N 0.01 N 0 – 5.000 kgf 0 – 11.00 lbf
FGJN-20 0 – 200.0 N 0.1 N 0 – 20.00 kgf 0 – 44.00 lbf
FGJN-50 0 – 500.0 N 0.1 N 0 – 50.00 kgf 0 – 110.0 lbf

The post FGJN
Force Gauge first appeared on EgeRate Elektronik.

]]> FGP Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/fgp-force-gauge/ Mon, 24 Apr 2023 09:48:05 +0000 https://www.egerate.com/?post_type=product&p=13560 8 measuring ranges available
from 0 - 2.000 N up to 0 - 1000.0 N
Digital force gauge for determination of compression and tension forces, useable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency

Compact, low cost force measuring unit with fast measuring frequency for exact acquisition of peak values

Force gauge with digital output signal for data processing with PC

The post FGP
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak force – to measure the peak force during a test
  • Output signal:
    – USB
    – RS-232 (selectable baud rate)
    – analog ±1 V DC
  • Force measuring device with high sampling rate of 1000 times/s for fast acquisition of peak values
  • 3 memory modes:
    Continuous memory – permanent saving of readings and statistical values of a series of measurements
    Single memory – saving single readings and statistical values of a series of measurements
    Standard memory – Saving the statistical values of a series of measurements and the last reading
  • Force gauge FGP with user switchable units: N, gf (kgf) und ozf (lbf)
  • »Zero Set« to zero the gauge in all operating positions
  • Display can be reversed for inverted use; e. g. on vertical test stand
  • selectable display update time

Standard Features

  • Force measuring device exact measuring with an accuracy of ±0.2 %
  • 200 % overload protection
  • Force gauge FGP with easy to read LCD display
  • For hand-held use or mounting on test stand (mounting thread 4 x M4 in back)
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Operates on rechargeable battery and/or AC adapter
  • Certificate of Compliance 2.1 is included
  • Full set of accessories included

 Available Models

Model Capacity
N		 Resolution Capacity
in gf; kgf		 Capacity
in ozf; lbf
FGP-0.2 0 – 2.000 N 0.001 N 0 – 200.0 gf 0 – 7.00 ozf
FGP-0.5 0 – 5.000 N 0.001 N 0 – 500.0 gf 0 – 18.00 ozf
FGP-1 0 – 10.00 N 0.01 N 0 – 1.00 kgf 0 – 2.200 lbf
FGP-2 0 – 20.00 N 0.01 N 0 – 2.000 kgf 0 – 4.400 lbf
FGP-5 0 – 50.00 N 0.01 N 0 – 5.000 kgf 0 – 11.00 lbf
FGP-20 0 – 200.0 N 0.1 N 0 – 20.00 kgf 0 – 44.00 lbf
FGP-50 0 – 500.0 N 0.1 N 0 – 50.00 kgf 0 – 110.0 lbf
FGP-100 0 – 1000 N 1 N 0 – 100.0 kgf 0 – 220.0 lbf

The post FGP
Force Gauge first appeared on EgeRate Elektronik.

]]> eZT Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/ezt-force-gauge/ Mon, 24 Apr 2023 08:46:04 +0000 https://www.egerate.com/?post_type=product&p=13548 Measuring range available
0 - 20 kN (tension and compression)
0.5 Nm - 10 Nm (torque)
Digital force gauge for determination of compression, tension and torque forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency

High quality force measuring unit with interface (RS-232, USB and analog) and memory This device has a fast measuring frequency for exact acquisition of peak values

Different load cells, calibrated to the force gauge, can be connected

The post eZT
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • Different load cells of series e, calibrated to force gauge eZT, can be used.
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak force – peak force – to measure the peak force during a test
  • Force gauge eZT with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 16 times/sec
  • Easy to read display (OLED)
  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
  • Storage of 1000 values, which can be recalled:
    – on the display
    – data transfer to a PC
    – for printing with report
  • Output signal:
    – RS-232 for connecting to a PC
    – USB
    – analog ±2 V DC
  • Display of Force gauge eZT can be reversed for inverted use; e. g. on vertical test stand
  • »Zero Set« to zero the gauge in all operating positions
  • Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
  • Force gauge eZT with user switchable units: N, kgf (gf) and lbf (ozf)
  • Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
  • In combination with a test stand with linear scale, force-displacement measurements are possible with force gauge eZT.
  • Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
  • 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
  • Indication of two peak values per measurement.

Standard Features

  • The accuracy is depending on the connected load cell
  • Approx. 200 % overload protection
  • For hand-held use or mounting on test stand
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Non-slip rubber grip
  • Operates on rechargeable battery and/or AC adapter

The post eZT
Force Gauge first appeared on EgeRate Elektronik.

]]> ZTA-DPU Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/zta-dpu-force-gauge/ Mon, 24 Apr 2023 06:41:15 +0000 https://www.egerate.com/?post_type=product&p=13521 12 measuring ranges available
from 0 - 2 N up to 0 - 20 kN
Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency

High quality force measuring unit with interface (RS-232, USB and analog) and memory This device has a fast measuring frequency for exact acquisition of peak values

Force gauge with separate remote load sensor

The post ZTA-DPU
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  1. 2 operation modes:
    real time – display the actual tension or compression force
    peak force – to measure the peak force during a test
  2. Force gauge ZTA-DPU with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  3. Display update time 16 times/sec
  4. Easy to read display (OLED)
  5. The header and footer of the display can be customized, as well as switched on and off
  6. Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
  7. Storage of 1000 values, which can be recalled:
    – on the display
    – data transfer to a PC
    – for printing with report
  8. Output signal:
    – RS-232 for connecting to a PC
    – USB
    – analog ±2 V DC
  9. Display can be reversed for inverted use; e. g. on vertical test stand
  10. »Zero Set« to zero the gauge in all operating positions
  11. Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
  12. Force gauge ZTA-DPU with user switchable units: N, kgf (gf) and lbf (ozf)
  13. Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
  14. Manufacturers inspection certificate is included

Special features in comparison to standard unit ZTS-DPU

  1. In combination with a test stand with linear scale, force-displacement measurements are possible.
  2. Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
  3. 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
  4. Indication of two peak values per measurement.

Standard Features

  • Force gauge ZTA-DPU (for exact measuring with an accuracy of ±0.2 % full scale
  • Approx. 200 % overload protection
  • For hand-held use or mounting on test stand
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Non-slip rubber grip
  • Operates on rechargeable battery and/or AC adapter
  • Full set of accessories included

 Available Models

Model Capacity N Resolution Capacity gf; kgf Capacity ozf; lbf Measuring shaft
ZTA-2-DPU 0 – 2.000 N 0.001 N 0 – 200.0 gf 0 – 7.00 ozf M6
ZTA-5-DPU 0 – 5.000 N 0.001 N 0 – 500.0 gf 0 – 18.00 ozf M6
ZTA-20-DPU 0 – 20.00 N 0.01 N 0 – 2.000 kgf 0 – 4.400 lbf M6
ZTA-50-DPU 0 – 50.00 N 0.01 N 0 – 5.000 kgf 0 – 11.00 lbf M6
ZTA-100-DPU 0 – 100.0 N 0.1 N 0 – 10.00 kgf 0 – 22.00 lbf M6
ZTA-200-DPU 0 – 200.0 N 0.1 N 0 – 20.00 kgf 0 – 44.00 lbf M6
ZTA-500-DPU 0 – 500.0 N 0.1 N 0 – 50.00 kgf 0 – 110.0 lbf M6
ZTA-1000-DPU 0 – 1000 N 1 N 0 – 100.0 kgf 0 – 220.0 lbf M10
ZTA-2000-DPU 0 – 2000 N 1 N 0 – 200.0 kgf 0 – 440.0 lbf M10
ZTA-5000-DPU 0 – 5000 N 1 N 0 – 500.0 kgf 0 – 1100.0 lbf M10
ZTA-10k-DPU* 0 – 10 kN 10 N 0 – 1000.0 kgf 0 – 2200.0 lbf M18 female screw
ZTA-20k-DPU* 0 – 20 kN 10 N 0 – 2000.0 kgf 0 – 4400.0 lbf M18 female screw

 *Note:
No attachment is included with model of measuring range 10 kN and higher. These models do not have measuring shaft, but there is a female thread in place of a measuring shaft.

The post ZTA-DPU
Force Gauge first appeared on EgeRate Elektronik.

]]> ZTS-DPU Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/zts-dpu-force-gauge/ Wed, 19 Apr 2023 17:44:11 +0000 https://www.egerate.com/?post_type=product&p=13488 12 measuring ranges available
from 0 - 2 N up to 0 - 20 kN
Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency

High quality force measuring unit with interface (RS-232, USB and analog) and memory This device has a fast measuring frequency for exact acquisition of peak values

Force gauge seperate remote load sensor

The post ZTS-DPU
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak force – to measure the peak force during a test
  • Force gauge ZTS-DPU with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 16 times/sec
  • Easy to read display (OLED)
  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
  • Storage of 1000 values, which can be recalled:
    – on the display
    – data transfer to a PC
    – for printing with report
  • Output signal:
    – RS-232 C for connecting to a PC
    – USB
    – analog ±2 V DC
  • Display can be reversed for inverted use; e. g. on vertical test stand
  • »Zero Set« to zero the gauge in all operating positions
  • Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
  • Force gauge ZTS-DPU with user switchable units: N, kgf (gf) and lbf (ozf)
  • Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
  • Manufacturers inspection certificate is included

Standard Features

  • Force gauge ZTS-DPU for exact measuring with an accuracy of ±0.2 % full scale
  • Approx. 200 % overload protection
  • For hand-held use or mounting on test stand
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Non-slip rubber grip
  • Operates on rechargeable battery and/or AC adapter
  • Full set of accessories included

 Available Models

Model Capacity N Resolution Capacity gf; kgf Capacity ozf; lbf Measuring shaft
ZTS-2-DPU 0 – 2.000 N 0.001 N 0 – 200.0 gf 0 – 7.00 ozf M6
ZTS-5-DPU 0 – 5.000 N 0.001 N 0 – 500.0 gf 0 – 18.00 ozf M6
ZTS-20-DPU 0 – 20.00 N 0.01 N 0 – 2.000 kgf 0 – 4.400 lbf M6
ZTS-50-DPU 0 – 50.00 N 0.01 N 0 – 5.000 kgf 0 – 11.00 lbf M6
ZTS-100-DPU 0 – 100.0 N 0.1 N 0 – 10.00 kgf 0 – 22.00 lbf M6
ZTS-200-DPU 0 – 200.0 N 0.1 N 0 – 20.00 kgf 0 – 44.00 lbf M6
ZTS-500-DPU 0 – 500.0 N 0.1 N 0 – 50.00 kgf 0 – 110.0 lbf M6
ZTS-1000-DPU 0 – 1000 N 1 N 0 – 100.0 kgf 0 – 220.0 lbf M10
ZTS-2000-DPU 0 – 2000 N 1 N 0 – 200.0 kgf 0 – 440.0 lbf M10
ZTS-5000-DPU 0 – 5000 N 1 N 0 – 500.0 kgf 0 – 1100.0 lbf M10
ZTS-10k-DPU* 0 – 10 kN 10 N 0 – 1000.0 kgf 0 – 2200.0 lbf M18 female screw
ZTS-20k-DPU* 0 – 20 kN 10 N 0 – 2000.0 kgf 0 – 4400.0 lbf M18 female screw

 *Note:
No attachment is included with model of measuring range 10 kN and higher. These models do not have measuring shaft, but there is a female thread in place of a measuring shaft.

The post ZTS-DPU
Force Gauge first appeared on EgeRate Elektronik.

]]> ZTA Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/zta-force-gauge/ Wed, 19 Apr 2023 17:04:24 +0000 https://www.egerate.com/?post_type=product&p=13458 10 measuring ranges available
from 0 - 2 N up to 0 - 5000 N
Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency

High quality unit with interface (RS-232, USB and analog) and memory This force measuring unit has a fast measuring frequency for exact acquisition of peak values

Force gauge with digital output signal for data processing with a PC

The post ZTA
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak force – to measure the peak force during a test
  • Force gauge ZTA with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 16 times/sec
  • Easy to read display (OLED)
  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
  • Storage of 1000 values, which can be recalled:
    – on the display
    – data transfer to a PC
    – for printing with report
  • Output signal:
    – RS-232 for connecting to a PC
    – USB
    – analog ±2 V DC
  • Display of Force gauge ZTA can be reversed for inverted use; e. g. on vertical test stand
  • »Zero Set« to zero the gauge in all operating positions
  • Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
  • Force gauge ZTA with user switchable units: N, kgf (gf) and lbf (ozf)
  • Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
  • Manufacturers inspection certificate is included

Special features in comparison to standard unit ZTS

  • In combination with a test stand with linear scale, force-displacement measurements are possible.
  • Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
  • 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
  • Indication of two peak values per measurement.

Standard Features

  • Force gauge ZTA for exact measuring with an accuracy of ±0.2 % full scale
  • Approx. 200 % overload protection
  • For hand-held use or mounting on test stand
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Non-slip rubber grip
  • Operates on rechargeable battery and/or AC adapter
  • Full set of accessories included

 Available Models

Model Capacity N
 Resolution Capacity gf; kgf Capacity ozf; lbf
ZTA-2N 0 – 2.000 N 0.001 N 0 – 200.0 gf 0 – 7.00 ozf
ZTA-5N 0 – 5.000 N 0.001 N 0 – 500.0 gf 0 – 18.00 ozf
ZTA-20N 0 – 20.00 N 0.01 N 0 – 2.000 kgf 0 – 4.400 lbf
ZTA-50N 0 – 50.00 N 0.01 N 0 – 5.000 kgf 0 – 11.00 lbf
ZTA-100N 0 – 100.0 N 0.1 N 0 – 10.00 kgf 0 – 22.00 lbf
ZTA-200N 0 – 200.0 N 0.1 N 0 – 20.00 kgf 0 – 44.00 lbf
ZTA-500N 0 – 500.0 N 0.1 N 0 – 50.00 kgf 0 – 110.0 lbf
ZTA-1000N 0 – 1000 N 1 N 0 – 100.0 kgf 0 – 220.0 lbf
ZTA-2500N 0 – 2500 N 1 N 0 – 250.0 kgf 0 – 560.0 lbf
ZTA-5000N 0 – 5000 N 1 N 0 – 500.0 kgf 0 – 1100.0 lbf

The post ZTA
Force Gauge first appeared on EgeRate Elektronik.

]]> ZTS Force Gauge https://www.egerate.com/urun/mekanik/kuvvet-olcum/dijital-dinamometre/zts-force-gauge/ Wed, 19 Apr 2023 16:13:21 +0000 https://www.egerate.com/?post_type=product&p=13422 10 measuring ranges available
from 0 - 2 N up to 0 - 5000 N
Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry, which need a fast measuring frequency

High quality unit with interface (RS-232, USB and analog) and memory This force measuring unit has a fast measuring frequency for exact acquisition of peak values

Force gauge with digital output signal for data processing with a PC

The post ZTS
Force Gauge first appeared on EgeRate Elektronik.

]]> Special Features
  • 2 operation modes:
    real time – display the actual tension or compression force
    peak force – to measure the peak force during a test
  • Force gauge ZTS with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 16 times/sec
  • Easy to read display (OLED)
  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
  • Storage of 1000 values, which can be recalled:
    – on the display
    – data transfer to a PC
    – for printing with report
  • Output signal:
    – RS-232 for connecting to a PC
    – USB
    – analog ±2 V DC
  • Display can be reversed for inverted use; e. g. on vertical test stand
  • »Zero Set« to zero the gauge in all operating positions
  • Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
  • Force gauge with user switchable units: N, kgf (gf) und lbf (ozf)
  • Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
  • Manufacturers inspection certificate is included

Standard Features

  • Force gauge ZTS for exact measuring with an accuracy of ±0.2 % full scale
  • Approx. 200 % overload protection
  • For hand-held use or mounting on test stand
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Non-slip rubber grip
  • Operates on rechargeable battery and/or AC adapter
  • Full set of accessories included

 Available Models

Model Capacity N
 Resolution Capacity gf; kgf Capacity ozf; lbf
ZTS-2N 0 – 2.000 N 0.001 N 0 – 200.0 gf 0 – 7.00 ozf
ZTS-5N 0 – 5.000 N 0.001 N 0 – 500.0 gf 0 – 18.00 ozf
ZTS-20N 0 – 20.00 N 0.01 N 0 – 2.000 kgf 0 – 4.400 lbf
ZTS-50N 0 – 50.00 N 0.01 N 0 – 5.000 kgf 0 – 11.00 lbf
ZTS-100N 0 – 100.0 N 0.1 N 0 – 10.00 kgf 0 – 22.00 lbf
ZTS-200N 0 – 200.0 N 0.1 N 0 – 20.00 kgf 0 – 44.00 lbf
ZTS-500N 0 – 500.0 N 0.1 N 0 – 50.00 kgf 0 – 110.0 lbf
ZTS-1000N 0 – 1000 N 1 N 0 – 100.0 kgf 0 – 220.0 lbf
ZTS-2500N 0 – 2500 N 1 N 0 – 250.0 kgf 0 – 560.0 lbf
ZTS-5000N 0 – 5000 N 1 N 0 – 500.0 kgf 0 – 1100.0 lbf

The post ZTS
Force Gauge first appeared on EgeRate Elektronik.

]]>