Hans Schmidt Elektronik Gerginlik Ölçüm Sensörü - EgeRate Elektronik https://www.egerate.com Wed, 19 Apr 2023 10:22:11 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans Schmidt Elektronik Gerginlik Ölçüm Sensörü - EgeRate Elektronik https://www.egerate.com 32 32 SFZ Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/sfz-tension-sensor/ Tue, 18 Apr 2023 13:37:10 +0000 https://www.egerate.com/?post_type=product&p=13293 8 Tension ranges available
from 0 - 10 N up to 0 - 2000 N
For measuring the tension of running wires, fibre optics, cables, ropes, slim tapes and foils

Single roller tension sensor for installation at an existing deflection pulley

The post SFZ
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension Sensor SFZ without amplifier, output signal mV/V
  • Sensor for installation at an existing deflection pulley; though the in- and outcoming angle has to be constant
  • Existing rollers with 20 – 180 degree wrap angles can be used as measurement points for the sensor
  • Directly, axial force application
  • The progressively adjustable axial mounting depth using a drill hole (Ø 50 mm), enables accurate positioning of the roller depending on the material path
  • High overload protection (max. 10 times of nominal force, However 3200 N max. )
  • Easy mounting of rollers provided by the customer or from SCHMIDT. Send us your request !
  • IP 67 (dust tight and ingress of water) protected, optional IP 54
  • Different clamping devices are optional available

Standard Features

  • Required power supply 10 V DC regulated
  • Rugged, stainless steel housing
  • Sensor with highly mechanical rigidity
  • Supplied with a 5 m shielded cable with open ends (Optional length are available)
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report (only available in combination with a display)

 Available Models

Model Nominal Load in N
SFZ-10 10 N
SFZ-20 20 N
SFZ-50 50 N
SFZ-100 100 N
SFZ-200 200 N
SFZ-500 500 N
SFZ-1000 1000 N
SFZ-2000 2000 N

The post SFZ
Tension Sensor first appeared on EgeRate Elektronik.

]]> SFD Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/sfd-tension-sensor/ Tue, 18 Apr 2023 13:24:16 +0000 https://www.egerate.com/?post_type=product&p=13284 6 Tension ranges available
from 0 - 10 N up to 0 - 500 N
For measuring the tension of running wires, fibre optics, cables, ropes, slim tapes and foils

Single roller tension sensor for installation at an existing deflection point

The post SFD
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor SFD without amplifier, output signal mV/V
  • Sensor for installation at an existing deflection pulley; the in- and outcoming angle has to be constant
  • Existing rollers with 20 – 180 degree wrap angles can be used as measurement points for the sensor
  • Directly, axial force transmission
  • M25 x 2.5 threaded housing with lock-nuts permits easy mounting and simple alignment at a deviating point
  • The progressively adjustable axial mounting depth using two mounting screws wrench size 32 enables an accurate positioning of the guide roller
  • 10 times overload protection, max. 2000 N
  • Easy mounting of SCHMIDT rollers or customer provided rollers, send us your request!
  • IP 54 (dust tight and dripping water) protected
  • Special design to be used in explosive areas available on request

Standard Features

  • Required power supply + 10 V DC regulated
  • Rugged, stainless steel housing
  • Sensor with highly mechanical rigidity
  • Supplied with a 5 m shielded cable with open ends (optional lengths are available)
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report (only available in combination with a display)

 Available Models

Model Nominal Load
SFD-10 10 N
SFD-20 20 N
SFD-50 50 N
SFD-100 100 N
SFD-200 200 N
SFD-500 500 N

The post SFD
Tension Sensor first appeared on EgeRate Elektronik.

]]> FSR Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/fsr-tension-sensor/ Tue, 18 Apr 2023 12:45:43 +0000 https://www.egerate.com/?post_type=product&p=13262 5 Tension ranges available
from 0 - 10 N up to 0 - 500 N
Stationary electronic tension sensor for flexible material, as wires, thin ropes and cable up to 10 mm Ø, as well as linear materials up to 10 mm width

Large, hardened guide rollers for minimized material deflection with 29.5 mm or 70 mm groove Ø

Inexpensive, online tension sensor, single roller system, for mounting at an existing deflection pulley

The post FSR
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor FSR with integrated measuring amplifier and high accuracy of 1.5 % FS
  • Sensor for installation at an existing deflection pulley; the in- and outcoming angle β has to be 20° or more.
  • Ball-bearing mounted steel or aluminium guide rollers 29.5 mm and 70 mm groove Ø,
    – V-grooved (for material with max. 4 mm Ø)
    – U-grooved (for material with 3 up to 10 mm Ø)
    – tape grooved (for material with max. width of 10 mm)
  • Easy mounting of customer provided rollers – please contact us!
  • Various output signals are available:
    – analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
    – digital (optional): USB, RS-232, Wi-Fi, RS-422 – see model FSR-422
    – current: 4 – 20 mA (optional)
  • Easy installation, even afterwards, on existing machines
  • 2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out 38.5 – 40 mm Ø) – see picture. The housing of sensors with digital output are larger.
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge
  • Tension sensor with mechanical overload protection

Standard Features

  • Tension sensor FSR with Aluminium housing
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

 Available Models

Model Nominal Load
FSR-10N 0 – 10 N
FSR-20N 0 – 20 N
FSR-50N 0 – 50 N
FSR-100N 0 – 100 N
FSR-200N 0 – 200 N
FSR-500N 0 – 500 N

The post FSR
Tension Sensor first appeared on EgeRate Elektronik.

]]> TSR Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/tsr-tension-sensor/ Tue, 18 Apr 2023 12:21:08 +0000 https://www.egerate.com/?post_type=product&p=13250 5 Tension ranges available
from 0 - 10 N up to 0 - 200 N
Online tension sensor for flexible material, as wires, thin ropes and cable up to 10 mm Ø, as well as linear materials up to 10 mm width

Large, hardened guide rollers for minimized material deflection with 29.5 mm or 70 mm groove Ø

Stationary electronic tension sensor, single roller system, for mounting at an existing deflection pulley

The post TSR
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor TSR with integrated measuring amplifier and high accuracy 1 % FS
  • Sensor for installation at an existing deflection pulley; the in- and outcoming angle β has to be 20° or more
  • Ball-bearing mounted steel or aluminium guide rollers 29.5 mm and 70 mm groove Ø,
    – V-grooved (for material with max. 4 mm Ø)
    – U-grooved (for material with 3 up to 10 mm Ø)
    – tape grooved (for material with max. width of 10 mm)
  • Easy mounting of customer provided rollers – please contact us!
  • Various output signals are available
    – analog: 0 – 1 V (standard), 0 – 10 V (optional)
    – current: 4 – 20 mA (optional)
    – analog DMS: mV/V (optional)
  • Easy installation, even afterwards, on existing machines
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with hight quality strain gauge bridge
  • Tension sensor with mechanical overload protection

Standard Features

  • Tension sensor with rugged aluminium housing
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

 Available Models

Model Nominal Load
TSR-10N 0 – 10 N
TSR-20N 0 – 20 N
TSR-50N 0 – 50 N
TSR-100N 0 – 100 N
TSR-200N 0 – 200 N

The post TSR
Tension Sensor first appeared on EgeRate Elektronik.

]]> MZH-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/mzh-422-tension-sensor/ Tue, 18 Apr 2023 10:50:26 +0000 https://www.egerate.com/?post_type=product&p=13247 7 Tension ranges available
from 0 - 1000 cN up to 0 - 100 daN
Stationary electronic tension sensor for narrow, parallel running flexible material as wires, thin ropes and cables up to 15 mm Ø, as well as linear, flat material up to 10 mm width

Large, hardened guide rollers for minimized material deflection

Tension sensor with RS 422 output for multi station system and connection to a with PC

The post MZH-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Small, compact housing
  • Tension sensor MZH-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Typical material path – warping the 3 rollers
  • Ball-bearing mounted guide rollers,
    – V-grooved (for material with max. 4 mm Ø)
    – U-grooved (for material with 3 up to 15 mm Ø)
    – tape grooved (for material with max. width of 10 mm)
  • Easy installation, even afterwards, on existing machines
  • Universal mounting possibility – easy to install, even afterwards, on existing machines:
    The sensor can be mounted using the two threads at the underside of the housing body. Alternative it can be fixed on two flanges on the side of the unit.
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge

Standard Features

  • Control lamp shows operative mode availability
  • Tension sensor MZH-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Tension Range
 Measuring Head Width*
 SCHMIDT Calibration Material**
MZH-1000-422 0 – 1000 cN 120mm PA: 0.30 mm Ø
MZH-2000-422 0 – 2000 cN 120mm PA: 0.50 mm Ø
MZH-5000-422 0 – 5000 cN 120mm PA: 0.80 mm Ø
MZH-10K-422 0 – 10 daN 120mm PA: 1.00 mm Ø
MZH-20K-422 0 – 20 daN 120mm PA: 1.50 mm Ø
MZH-50K-422 0 – 50 daN 120mm Steel rope 1.50 mm Ø
(7x7x0.20)
MZH-100K-422 0 – 100 daN 120mm Steel rope 3.00 mm Ø
(6x7x0.30)

Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g or kg.
* Outer dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

The post MZH-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> MZB1-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/mzb1-422-tension-sensor/ Tue, 18 Apr 2023 10:41:50 +0000 https://www.egerate.com/?post_type=product&p=13244 4 Tension ranges available
from 0 - 1000 cN up to 0 - 10 daN
Stationary electronic tension sensor for tensions of narrow, parallel running textile ribbons, films, foils etc.

Compact sensor for continuous measuring of tensions with max. roller width of 20 mm

Tension sensor with RS 422 output for multi station system and connection to a with PC

The post MZB1-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Small, compact housing
  • Tension sensor MZB1-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Typical material path – warping the 3 rollers
  • Various roller widths from 7 mm up to 20 mm according to the application are available. The roller width must correspond with the width of the material to be measured
  • Easy installation, even afterwards, on existing machines
  • Universal mounting possibility – easy to install, even afterwards, on existing machines:
    The sensor can be mounted using the two threads at the underside of the housing body. Alternative it can be fixed on two flanges on the side of the unit.
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge

Standard Features

  • Control lamp shows operative mode availability
  • Tension sensor MZB1-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Tension Range*
 Measuring Head Width**
 Roller Width
MZB1-1000-422 0 – 1000 cN 120 mm 7, 10, 15, 20 mm
MZB1-2000-422 0 – 2000 cN 120 mm 7, 10, 15, 20 mm
MZB1-5000-422 0 – 5000 cN 120 mm 7, 10, 15, 20 mm
MZB1-10K-422 0 – 10 daN 120 mm 7, 10, 15, 20 mm

Other tension ranges available on request.
Other measuring units available, such as g or kg
* SCHMIDT calibration material depending on tension range and roller width
** Outside dimensions of front plate

Important for your order:
Please specify model and roller width! Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

The post MZB1-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> MZ1-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/mz1-422-tension-sensor/ Tue, 18 Apr 2023 10:24:39 +0000 https://www.egerate.com/?post_type=product&p=13234 4 Tension ranges available
from 0 - 1000 cN up to 0 - 10 daN
Stationary electronic tension sensor for measuring narrow, parallel running threads, fibers and thin wires with a diameter up to approx. 2 mm

Universal sensors for continuous tension measuring in wire and textile industry

Tension sensor with RS-422 output for multi station system and connection to a with PC

The post MZ1-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Feature
  • Small, compact housing
  • Tension sensor MZ1-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Typical material path – warping the 3 rollers
  • Different guide rollers are available, according to the application
  • Easy installation, even afterwards, on existing machines
  • Universal mounting possibility – easy to install, even afterwards, on existing machines:
    The sensor can be mounted using the two threads at the underside of the housing body. Alternative it can be fixed on two flanges on the side of the unit.
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge

Standard Features

  • V-grooved guide rollers, ball-bearing mounted
  • Control lamp shows operative mode availability
  • Tension sensor MZ1-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Measuring Range
 Measuring Head Width*
 SCHMIDT Calibration Material**
MZ1-1000-422 0 – 1000 cN 120 mm PA: 0.30 mm Ø
MZ1-2000-422 0 – 2000 cN 120 mm PA: 0.50 mm Ø
MZ1-5000-422 0 – 5000 cN 120 mm PA: 0.80 mm Ø
MZ1-10K-422 0 – 10 daN 120 mm PA: 1.00 mm Ø

Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g or kg.
* Outer dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

The post MZ1-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> FSB1-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/fsb1-422-tension-sensor/ Tue, 18 Apr 2023 09:53:46 +0000 https://www.egerate.com/?post_type=product&p=13232 8 Tension ranges available
from 0 - 100 cN up to 0 - 20 daN
Stationary electronic tension sensor for measuring low tensions of textile ribbons, films, foils, fibre bunches etc.

Cylindrical tape rollers with up to max. 30 mm width, one-sided mounting

Tension sensor with RS-422 output for multi station system and connection to a with PC

The post FSB1-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor FS1-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Various roller widths from 7 mm up to 30 mm according to the application are available. The roller width must correspond with the width of the material to be measured
  • Easy installation, even afterwards, on existing machines
  • 2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out: long hole R 19 mm, length 54 mm)
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge
  • Tension sensor with mechanical overload protection

Standard Features

  • Tape rollers, ball-bearing mounted
  • Control lamp shows operative mode availability
  • Tension sensor FSB1-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Tension Range*
 Measuring Head Width**
 Roller Width
FSB1-100-422 0 – 100 cN 60 mm 7, 10, 15, 20 mm
FSB1-200-422 0 – 200 cN 60 mm 7, 10, 15, 20 mm
FSB1-500-422 0 – 500 cN 60 mm 7, 10, 15, 20 mm
FSB1-1000-422 0 – 1000 cN 60 mm 7, 10, 15, 20, 30 mm
FSB1-2000-422 0 – 2000 cN 120 mm 7, 10, 15, 20, 30 mm
FSB1-5000-422 0 – 5000 cN 120 mm 7, 10, 15, 20, 30 mm
FSB1-10K-422 0 – 10 daN 120 mm 7, 10, 15, 20 mm
FSB1-20K-422 0 – 20 daN 220 mm 7, 10, 15, 20 mm

Other tension ranges available on request.
Other measuring units available, such as g or kg
* SCHMIDT calibration material depending on tension range and roller width
** Outside dimensions of front plate

Important for your order:
Please specify model and roller width! Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

The post FSB1-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> FSR-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/fsr-422-tension-sensor/ Tue, 18 Apr 2023 09:39:27 +0000 https://www.egerate.com/?post_type=product&p=13227 5 Tension ranges available
from 0 - 10 N up to 0 - 200 N
Stationary electronic tension sensor for flexible material, as wires, thin ropes and cable up to 10 mm Ø, as well as linear materials up to 10 mm width

Large, hardened guide rollers for minimized material deflection with 29.5 mm or 70 mm groove Ø

Tension sensor with RS-422 output for multi station system and connection to a with PC.
Single roller system for mounting at an existing deflection pulley.

The post FSR-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor FSR-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Sensor for installation at an existing deflection pulley; the in- and outcoming angle β has to be 20° or more.
  • Ball-bearing mounted steel or aluminium guide rollers 29.5 mm and 70 mm groove Ø,
    – V-grooved (for material with max. 4 mm Ø)
    – U-grooved (for material with 3 up to 10 mm Ø)
    – tape grooved (for material with max. width of 10 mm)
  • Easy mounting of customer provided rollers – please contact us!
  • Easy installation, even afterwards, on existing machines
  • 2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out: long hole R 19 mm, length 54 mm)
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge
  • Tension sensor with mechanical overload protection

Standard Features

  • Control lamp shows operative mode availability
  • Tension sensor FSR-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Nominal Load
FSR-10N-422 0 – 10 N
FSR-20N-422 0 – 20 N
FSR-50N-422 0 – 50 N
FSR-100N-422 0 – 100 N
FSR-200N-422 0 – 200 N
FSR-500N-422 0 – 500 N

The post FSR-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> FSL-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/fsl-422-tension-sensor/ Tue, 18 Apr 2023 09:06:43 +0000 https://www.egerate.com/?post_type=product&p=13225 4 Tension ranges available
from 0 - 100 cN up to 0 - 1000 cN
Stationary electronic tension sensors for measuring sensitive materials as optical fibres, carbon fibres, technical fibres etc.

Large, smooth running guide rollers for minimized material deflection with 32 mm groove Ø

Tension sensor with RS-422 output for multi station system and connection to a with PC

The post FSL-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor FSL-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Large bending radius for gentle handling of sensitive material by using smooth running, V-grooved guide rollers with Ø 29.5 mm, ball-bearing mounted
  • Easy installation, even afterwards, on existing machines
  • 2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out: long hole R 19 mm, length 54 mm)
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge
  • Tension sensor with mechanical overload protection

Standard Features

  • Control lamp shows operative mode availability
  • Tension sensor FSL-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Tension Range
 Measuring Head Width*
 SCHMIDT Calibration Material**
FSL-50-422 0 – 50 cN 150 mm PA: 0.12 mm Ø
FSL-100-422 0 – 100 cN 150 mm PA: 0.12 mm Ø
FSL-200-422 0 – 200 cN 150 mm PA: 0.12 mm Ø
FSL-500-422 0 – 500 cN 150 mm PA: 0.20 mm Ø
FSL-1000-422 0 – 1000 cN 150 mm PA: 0.30 mm Ø

Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g.
* Outer dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

The post FSL-422
Tension Sensor first appeared on EgeRate Elektronik.

]]>