• 2 operation modes:
  real time – display the actual tension or compression force
  peak mode – to measure the peak force during a test (memory pointer)
• Highest accuracy for high forces with ±0,3 % full scale
• Easy to use
• Force gauge RFB-750N with easy to read dial
• Force gauge with zero tare ring to zero the gauge in each position (necessary, if heavy clamps are mounted)
• Free manufacturers calibration report

Standard Features

• Simple, rugged, maintenance-free force measuring device
• Force gauge with rugged die-cast aluminium housing for heavy usage
• Full set of accessories included
• Can be used for various parts of body and items on different measurement condition, by changing the attachment

Available Models

The post RFB-750N
Force Gauge first appeared on EgeRate Elektronik.

• 3 operation modes:
  real time – display the actual tension or compression force
  peak force – to measure the peak force during a test
  continuity peak mode – to measure the peak force for each single measurement
• Force gauge RDSV-1000N with high sampling rate of 1000 times/sec to measure the peak force
• Display update 8 times/sec
• Storage of 1000 values, which can be recalled:
  – on the display
  – data transfer to a PC
• Output signal:
  – USB
  – RS-232
• Force gauge RDSV-1000 with user switchable units: N, gf (kgf) and ozf (lbf)
• Programmable high/low set-points for go/no-go testing:
  Display: good (OK), underrun/exceeding (OK is not displayed)
• »Zero Set« to zero the gauge in all operating positions. Alarm signal, if the actual position differs to much from the calibration position
• Mechanical stopper to prevent sensor-breakdown
• With the optional software Force Logger Plus up to 4 sensors can be connected simultaneously for data processing to a PC
• Manufacturers calibration report is included
• Display can be reversed for inverted use; e. g. on vertical test stand

Standard Features

• Force measuring device for exact measuring with an accuracy of ±0.2 % full scale ±1 digit
• Overload protection:
  200 % full scale
• For hand-held use or mounting on test stand (mounting thread 4 x M4 in back)
• Easy to operate
• Force gauge RDSV-1000N with easy to read LCD display
• Ergonomically-designed, rugged die-cast aluminium housing
• Operates on rechargeable battery (NiMH) and/or AC adapter
• Full set of accessories included
• Can be used for various parts of body and items on different measurement condition, by changing the attachment

 Available models

The post RDSV-1000N
Force Gauge first appeared on EgeRate Elektronik.

• 2 operation modes:
  real time – display the actual tension or compression force
  peak mode – to measure the peak force during a test
• Force gauge FGJN with high sampling rate of 1000 times/sec for exact acquisition of peak values
• »Zero Set« to zero the gauge in all operating positions
• Force gauge with user switchable units: N, kgf and lbf
• User selectable display update time
• Display can be reversed for inverted use; e.g. on vertical test stands

Standard Features

• Force measuring device for exact measuring with an accuracy of 0.2 %
• 200 % overload protection
• Force gauge with easy to read LCD display
• For hand-held use or mounting on test stands (mounting thread 4 x M4 in the back)
• Ergonomically-designed, rugged die-cast aluminium housing
• Operates on rechargeable battery and/or AC adapter
• Certificate of Compliance with the order 2.1 is included
• Full set of accessories included

 Available Models

The post FGJN
Force Gauge first appeared on EgeRate Elektronik.

• 2 operation modes:
  real time – display the actual tension or compression force
  peak force – to measure the peak force during a test
• Door tester unit ZTA-RDM-2000N with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
• Display update time 16 times/sec
• Easy to read display (OLED)
• The header and footer of the display can be customized, as well as switched on and off
• Programmable high/low set-points for go/no-go testing:
  with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
• Storage of 1000 values, which can be recalled:
  – on the display
  – data transfer to a PC
  – for printing with report
• Output signal:
  – RS 232 C for connecting to a PC
  – USB
  – analog ±2 V DC
• Display can be reversed for inverted use; e. g. on vertical test stand
• »Zero Set« to zero the gauge in all operating positions
• Door tester unit ZTA-RDM-2000N with separate remote load sensorForce gauge with user switchable units: N, kgf (gf) und lbf (ozf)
• Selectable language (english, german, italian, french, spanish, chinese, japanese, korean)
• Manufacturers inspection certificate is included

Special features in comparison to standard unit ZTS-RDM-2000N

• Readings can be saved on a USB flash drive (Not included in delivery).
• 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
• Indication of two peak values per measurement.

Standard Features

• Easy to change extension shaft
• Door tester unit ZTA-RDM-2000N for exact measuring with an accuracy of 0.2 %
• 200 % overload protection
• Ergonomically-designed, rugged die-cast aluminium housing
• Non-slip rubber grip
• Operates on rechargeable battery and/or AC adapter

 Available Models

 The accuracy of the load cell can only be assured, by using with the force gauge, the load cell is adjusted for.

The post ZTA-RDM-2000N
Door Tester Unit first appeared on EgeRate Elektronik.

• 2 operation modes:
  real time – display the actual tension or compression force
  peak force – to measure the peak force during a test
• Door Tester Unit ZTS-RDM-2000N with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
• Display update time 16 times/sec
• Easy to read display (OLED)
• The header and footer of the display can be customized, as well as switched on and off
• Programmable high/low set-points for go/no-go testing:
  with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
• Storage of 1000 values, which can be recalled:
  – on the display
  – data transfer to a PC
  – for printing with report
• Output signal:
  – RS-232 for connecting to a PC
  – USB
  – analog ±2 V DC
• Display can be reversed for inverted use; e. g. on vertical test stand
• »Zero Set« to zero the gauge in all operating positions
• Door Tester Unit ZTS-RDM-2000N with separate remote load sensor
• Force gauge with user switchable units: N, kgf (gf) und lbf (ozf)
• Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
• Manufacturers inspection certificate is included

Standard Features

• Easy to change extension shaft
• Door Tester Unit ZTS-RDM-2000N for exact measuring with an accuracy of 0.2 %
• 200 % overload protection
• Ergonomically-designed, rugged die-cast aluminium housing
• Non-slip rubber grip
• Operates on rechargeable battery and/or AC adapter

 Available Models

 The accuracy of the load cell can only be assured, by using with the force gauge, the load cell is adjusted for.

The post ZTS-RDM-2000N
Door Tester Unit first appeared on EgeRate Elektronik.

• 2 operation modes:
  real time – display the actual tension or compression force
  peak force – to measure the peak force during a test
• Output signal:
  – USB
  – RS-232 (selectable baud rate)
  – analog ±1 V DC
• Force measuring device with high sampling rate of 1000 times/s for fast acquisition of peak values
• 3 memory modes:
  Continuous memory – permanent saving of readings and statistical values of a series of measurements
  Single memory – saving single readings and statistical values of a series of measurements
  Standard memory – Saving the statistical values of a series of measurements and the last reading
• Force gauge FGP with user switchable units: N, gf (kgf) und ozf (lbf)
• »Zero Set« to zero the gauge in all operating positions
• Display can be reversed for inverted use; e. g. on vertical test stand
• selectable display update time

Standard Features

• Force measuring device exact measuring with an accuracy of ±0.2 %
• 200 % overload protection
• Force gauge FGP with easy to read LCD display
• For hand-held use or mounting on test stand (mounting thread 4 x M4 in back)
• Ergonomically-designed, rugged die-cast aluminium housing
• Operates on rechargeable battery and/or AC adapter
• Certificate of Compliance 2.1 is included
• Full set of accessories included

 Available Models

The post FGP
Force Gauge first appeared on EgeRate Elektronik.

• Different load cells of series e, calibrated to force gauge eZT, can be used.
• 2 operation modes:
  real time – display the actual tension or compression force
  peak force – peak force – to measure the peak force during a test
• Force gauge eZT with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
• Display update time 16 times/sec
• Easy to read display (OLED)
• The header and footer of the display can be customized, as well as switched on and off
• Programmable high/low set-points for go/no-go testing:
  with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
• Storage of 1000 values, which can be recalled:
  – on the display
  – data transfer to a PC
  – for printing with report
• Output signal:
  – RS-232 for connecting to a PC
  – USB
  – analog ±2 V DC
• Display of Force gauge eZT can be reversed for inverted use; e. g. on vertical test stand
• »Zero Set« to zero the gauge in all operating positions
• Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
• Force gauge eZT with user switchable units: N, kgf (gf) and lbf (ozf)
• Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
• In combination with a test stand with linear scale, force-displacement measurements are possible with force gauge eZT.
• Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
• 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
• Indication of two peak values per measurement.

Standard Features

• The accuracy is depending on the connected load cell
• Approx. 200 % overload protection
• For hand-held use or mounting on test stand
• Ergonomically-designed, rugged die-cast aluminium housing
• Non-slip rubber grip
• Operates on rechargeable battery and/or AC adapter

The post eZT
Force Gauge first appeared on EgeRate Elektronik.

1. 2 operation modes:
   real time – display the actual tension or compression force
   peak force – to measure the peak force during a test
2. Force gauge ZTA-DPU with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
3. Display update time 16 times/sec
4. Easy to read display (OLED)
5. The header and footer of the display can be customized, as well as switched on and off
6. Programmable high/low set-points for go/no-go testing:
   with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
7. Storage of 1000 values, which can be recalled:
   – on the display
   – data transfer to a PC
   – for printing with report
8. Output signal:
   – RS-232 for connecting to a PC
   – USB
   – analog ±2 V DC
9. Display can be reversed for inverted use; e. g. on vertical test stand
10. »Zero Set« to zero the gauge in all operating positions
11. Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
12. Force gauge ZTA-DPU with user switchable units: N, kgf (gf) and lbf (ozf)
13. Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
14. Manufacturers inspection certificate is included

Special features in comparison to standard unit ZTS-DPU

1. In combination with a test stand with linear scale, force-displacement measurements are possible.
2. Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
3. 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
4. Indication of two peak values per measurement.

Standard Features

• Force gauge ZTA-DPU (for exact measuring with an accuracy of ±0.2 % full scale
• Approx. 200 % overload protection
• For hand-held use or mounting on test stand
• Ergonomically-designed, rugged die-cast aluminium housing
• Non-slip rubber grip
• Operates on rechargeable battery and/or AC adapter
• Full set of accessories included

 Available Models

 *Note:
No attachment is included with model of measuring range 10 kN and higher. These models do not have measuring shaft, but there is a female thread in place of a measuring shaft.

The post ZTA-DPU
Force Gauge first appeared on EgeRate Elektronik.

• 2 operation modes:
  real time – display the actual tension or compression force
  peak force – to measure the peak force during a test
• Force gauge ZTS-DPU with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
• Display update time 16 times/sec
• Easy to read display (OLED)
• The header and footer of the display can be customized, as well as switched on and off
• Programmable high/low set-points for go/no-go testing:
  with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
• Storage of 1000 values, which can be recalled:
  – on the display
  – data transfer to a PC
  – for printing with report
• Output signal:
  – RS-232 C for connecting to a PC
  – USB
  – analog ±2 V DC
• Display can be reversed for inverted use; e. g. on vertical test stand
• »Zero Set« to zero the gauge in all operating positions
• Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
• Force gauge ZTS-DPU with user switchable units: N, kgf (gf) and lbf (ozf)
• Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
• Manufacturers inspection certificate is included

Standard Features

• Force gauge ZTS-DPU for exact measuring with an accuracy of ±0.2 % full scale
• Approx. 200 % overload protection
• For hand-held use or mounting on test stand
• Ergonomically-designed, rugged die-cast aluminium housing
• Non-slip rubber grip
• Operates on rechargeable battery and/or AC adapter
• Full set of accessories included

 Available Models

 *Note:
No attachment is included with model of measuring range 10 kN and higher. These models do not have measuring shaft, but there is a female thread in place of a measuring shaft.

The post ZTS-DPU
Force Gauge first appeared on EgeRate Elektronik.

• 2 operation modes:
  real time – display the actual tension or compression force
  peak force – to measure the peak force during a test
• Force gauge ZTA with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
• Display update time 16 times/sec
• Easy to read display (OLED)
• The header and footer of the display can be customized, as well as switched on and off
• Programmable high/low set-points for go/no-go testing:
  with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG) and relay outputs
• Storage of 1000 values, which can be recalled:
  – on the display
  – data transfer to a PC
  – for printing with report
• Output signal:
  – RS-232 for connecting to a PC
  – USB
  – analog ±2 V DC
• Display of Force gauge ZTA can be reversed for inverted use; e. g. on vertical test stand
• »Zero Set« to zero the gauge in all operating positions
• Alarm indication in display and output signal in case of overload for test stands of series MX, MX2 and EMX
• Force gauge ZTA with user switchable units: N, kgf (gf) and lbf (ozf)
• Selectable language (English, German, Italian, French, Spanish, Chinese, Japanese, Korean)
• Manufacturers inspection certificate is included

Special features in comparison to standard unit ZTS

• In combination with a test stand with linear scale, force-displacement measurements are possible.
• Readings can be transferred from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
• 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
• Indication of two peak values per measurement.

Standard Features

• Force gauge ZTA for exact measuring with an accuracy of ±0.2 % full scale
• Approx. 200 % overload protection
• For hand-held use or mounting on test stand
• Ergonomically-designed, rugged die-cast aluminium housing
• Non-slip rubber grip
• Operates on rechargeable battery and/or AC adapter
• Full set of accessories included

 Available Models

The post ZTA
Force Gauge first appeared on EgeRate Elektronik.