Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2

The post GLS
Portable gloss measurement for all surfac... first appeared on EgeRate Elektronik.

Bresle Method Patches

PosiPatch

Reusable flexible patch with magnetic ring

For measuring salt contamination in accordance with ISO 8502-6,9

• Magnetic ring attaches to steel with no residue to clean
  Standard magnetic ring for flat surfaces and diameters > 1m (40 in.)
  Flexible magnetic ring for ID/OD diameters > 10 cm (4 in.)*
• Automatic air removal through a watertight, air permeable membrane
• No sharps, no needles! Safe, flexible dispensing tip mates with PosiPatch
• Comparable price to latex patches
• Reusable patent-pending PosiPatch saves time and money
• Easy-to-use in any orientation

Test Area	1250 mm2
Test Volume	2.5 – 3 ml
Patch Diameter	44.4 mm (1.75 in)
Magnetic Ring Diameter	66.9 mm (2.60 in)
Background Contamination	< 3 mg/m2

*Flexible magnetic ring minimum ID is 12 cm (4.5 in.)

Polyurethane Adhesive Patch

Self-adhesive, polyurethane patches

For measuring salt contamination in accordance with ISO 8502-6,9

• Low-tack adhesive for easy patch removal with no residue to clean
• Works on nearly any material or surface geometry
• Latex-free
• Lower cost than latex patch
• Easy-to-use in any orientation

Test Area	1250 mm2
Test Volume	2 – 3 ml
Dimensions	50 mm x 50 mm (1.97 in x 1.97 in)
Background Contamination	< 5 mg/m2

Latex Adhesive Patch

ISO 8502-6 conforming latex patch with easy-open tab and low-tack adhesive with TearGuard™ technology.

Test Area	1250 mm2
Test Volume	2 – 15 ml
Dimensions	52 mm x 52 mm (2.05 in x 2.05 in)
Background Contamination	< 5 mg/m2

Ordering Guide

The post PT-SST
PosiTector SST Soluble Salt Tester first appeared on EgeRate Elektronik.

Not for designed for use in pressurized systems.

Model Comparison

Step 1: Select a body

Feature Comparıson Chart	Basıc (1)	Memory (3)
Hi Contrast LCD Display	Color	Color
Reading Storage Capacity	Storage of 2,500 datasets	Storage of 100,000 datasets in up to 1,000 batches
Auto Log Mode automatically records environmental parameters at user selected time intervals. Runs unattended on batteries for up to 50 hours or continuously via USB
Enhanced Auto Log mode turns the gage off between readings for up to 8 months of battery life. Each reading can be uploaded to PosiSoft.net or an FTP server using WiFi. Automatically group readings into batches at daily, weekly, or monthly interval	–
User defined limits for all parameters – visible and audible warnings. Send email alerts when connected to WiFi	–
Onscreen Batch Annotation – add notes, change batch names and more with built-in QWERTY keyboard	–
Store thickness, profile, environmental, hardness, salt contamination and wall thickness measurements in individual batches	–
Wet bulb temperature can be displayed and recorded	–
Trend charts graph readings in real-time	–
WiFi technology wirelessly synchronizes with PosiSoft.net, downloads software updates and more	–
Bluetooth® technology for data transfer to a mobile device running the PosiTector App or optional portable printer	–
Mobile app connects PosiTector Advanced instruments to your iOS or Android smart device	–

Step 2: Select from 4 DPM probes

• Includes built-in air temperature/humidity sensor and thermocouple surface temperature sensor

Integral Probe with Infrared Surface Temperature Sensor (DPMIR)

• Measures and records environmental conditions including relative humidity, air temperature, surface temperature, dew point temperature, the difference between surface and dew point temperatures.
• Non-contact surface temperature sensor
• Measures hard to reach areas and moving parts
• 4:1 Distance to spot ratio (D:S), optimized for measuring large surfaces
• Pre-programmed and user adjustable emissivity options

Integral Probe with Cabled Surface Temperature Sensor (DPMS)

• Includes built-in air temperature/humidity sensor and K-type connector
• Magnetic surface temperature sensor with armored cable and locking device to prevent accidental disconnection from the instrument during unattended operation
• Includes magnetic tab to attach the PosiTector body onto steel structures
• Easily converts to accept other optional K-type thermocouple sensors including (a) hand-held surface temperature sensor, (b) self-adhering surface temperature sensor and (c) liquid temperature sensor.

Integral Probe with Wind Speed Sensor (DPMA)

• Includes the ambient temperature, surface temperature, and humidity sensors from PosiTector DPM Integral Probe plus a hot wire anemometer
• Anemometer mode measures air temperature, relative humidity and wind speed
• Auto-rotating display for inverted use
• Wind Speed Range: 0-20 m/s, 0-44 mph, 0-65 ft/s, 0-3900 ft/m, 0-72 km/h, 0-38 knots
• Wind Speed Accuracy: ± 3% Full Scale

Anemometer mode shown includes wind speed (v)

Cabled Probe with 1/2″ NPT Threads (DPMD)

• Measures dew point, relative humidity and air temperature (shown)
• Sintered aluminum housing protects sensors
• Includes magnetic tab to attach the PosiTector body onto steel structures
• ½” NPT threads for insertion into tanks and pipes (max 200 psi/ 1.3 MPa)

The post Positector DPM
Environment Meter / Dew Point ... first appeared on EgeRate Elektronik.

Range:

The humimeter BLO is equipped with two different external sensors depending on the requirements of the material or the system:

• The wood chip sensor is ideally suited for installation in screw conveyors, feed channels or bunkers. A wood chip sensor with a compression structure was specially developed for installation in places with low contact pressure and is suitable for light, loose wood chips.
• The wood chip sensor is ideally suited for installation in screw conveyors, feed channels or bunkers. A wood chip sensor with a compression structure was specially developed for installation in places with low contact pressure and is suitable for light, loose wood chips.

The wood chip sensor is ideally suited for installation in screw conveyors, feed channels or bunkers. A wood chip sensor with a compression structure was specially developed for installation in places with low contact pressure and is suitable for light, loose wood chips. The following requirements are met:

• Measuring device based on the requirements of the VDI standard 4206 sheet 4
• Material characteristics in accordance with EN ISO 16559 requirements
• Measuring device adjusted after calibration to the reference method EN ISO 18134-2

The post BLO
Online Moisture Measuring System first appeared on EgeRate Elektronik.

Only the exact determination of water content of biomass allows fair payment for producers, suppliers and end customers. The water content determines the fuel value of biomass. This makes quality control in the manufacturing and supplying of biomass increasingly important. Using a high quality biomass moisture meter you can prevent machine problems and avoid paying the high product price only for water.

Product name	Product type	Measurıng Range
Woodchips	P31 to P45	5 % – 70 %
Coarse chips	P45 to P63	5 % – 70 %
Softwood chips	P16 to P45	5 % – 70 %
Softwood coarse chips	P45 to P63	5 % – 70 %
Fine woodchips	P16	5 % – 70 %
Pellets	Wood pellets Ø 6 mm	5 % – 14 %
Miscanthus	Chopped miscanthus (P16)	5 % – 35 %
Shaving Softwood	Shavings from softwood	5 % – 45 %
Sawdust Softwood	Shavings from softwood	10 % – 60 %
Sawdust Hardwood	Shavings from softwood	10 % – 60 %
Corn cob	Corn cobs (chopped or whole cobs)	10 % – 60 %
Empty 1	For custom calibration curves
Empty 2	For custom calibration curves
Empty 3	For custom calibration curves
Reference	For Self-Test of BMA-2

Definition of wood chips types (Norm EN ISO 17225-1)

• P16 at least 75% of the mass between 3.15 and 16mm
• P31 at least 75% of the mass between 8 and 31.5mm
• P45 at least 75% of the mass between 8 and 45mm
• P63 at least 75% of the mass between 8 and 63mm

Complete Kit

BMA is delivered as a complete kit including:
– BMA gauge
– BMA measuring box (12 litre)
– Power supply unit 12 VDC, 4 A (AC/DC Converter, 100-240V AC)BMA-USB is delivered as a complete kit including:
– BMA gauge
– BMA measuring box (12 litre)
– Power supply unit 12 VDC, 4 A (AC/DC Converter, 100-240V AC)
– USB data output Option including Software & USB cable.

Note: Both versions are available with a Integrated Printer BMA-IP & BMA-ATRO-display of bulk density and bone dry weight (tons/m³),
These options must be specified at time of order.

	Item	Descrıptıon
	BMA-2	Professional Biomass Moisture Meter
	BMA-2-USB	Professional Biomass Moisture Meter with USB Output
	BMA-2-USB-ATRO	Professional Biomass Moisture Meter with USB Output with ATRO Option & Integrated Printer

The post BMA – BMA-2
Biomass Moisture Meter first appeared on EgeRate Elektronik.

Round timber and split logs moisture meter with ram-electrode

Because of the high measuring range (up to 60% water content) and high measuring depth this instrument is ideal for operators of biomass heating systems, wood suppliers and buyers of round and split logs.

Integrated calibration curves for various wood types are included allowing the BLW to display measurements directly in “Moisture Content”, eliminating the need to refer to separate “look-up tables. This insures the highest possible accuracy with minimum effort and reduces the chances of errors.

Separate calibration curves are supplied for Pine, Larch, Fir, Willow, Beech, Oak, Alder, Ash and Spruce.

The BLW complete kit includes BLW, plastic case, ram-electrodes, batteries and software. BLW-232 also includes data transfer cable with USB converter and Software. (Photo shows optional thermal printer.)

The post BLW
Timber Moisture Meter first appeared on EgeRate Elektronik.

Accurately measure the moisture content in Wood Chips with our BLL meter. One meter long insertion probe for easy measurement in deep piles of chips. The BLL is supplied with three (3) separate calibration curves, depending upon the physical makeup of the wood chips to measured. There are defined into the following classes as described in the European Standards as; Wood Chips, Coarse WC and Industry WC.

Wood Chips
A mix of different-sized wood chips
all LESS THAN 70 mm (2-3/4″)

Coarse WC
Equal-sized wood chips approx. 70 mm (2-3/4″)

Industry WC
A mix of different-sized wood chips
all LARGER THAN 70 mm (2-3/4″)

The post BLL
Wood Chip Moisture Meter with Insertion P... first appeared on EgeRate Elektronik.

NOTE: Not compatible with ULTIMETER II

The post WSF-10310U
ULTIMETER PRO Rain Gauge w/Heater ... first appeared on EgeRate Elektronik.

The ULTIMETER Anemometer/Wind Vane (“wind sensor”) is a patented, uniquely all-digital design containing two magnetic switches. Unlike conventional wind sensors, the ULTIMETER Anemometer’s patented digital design has no potentiometer or other friction contacts to wear out. It features bearings that are virtually corrosion proof, with self-lubricating Delrin® races and surgical steel balls. The precision-molded housing of UV-resistant Lexan® will resist the harshest elements for many years.

• Extremely Reliable
• No friction contacts to wear out
• Elegantly simple for longevity and reliability
• Top quality electrical components – two ultra-reliable, glass enclosed, hermetically sealed, magnetically operated reed switches
• Top quality mechanical components – UV resistant Lexan® molded parts, corrosion resistant bearings with Delrin races and surgical stainless steel balls
• Can be taken apart and reassembled for cleaning, if necessary, without tools and without affecting accuracy.
• Digital pulse data – resists electrical interference from radio transmitters or other sources
• Can operate over long distances with full accuracy, thanks to all-digital design.

The post WSF-10030PU
Anemometer/Wind Vane PRO for Unim... first appeared on EgeRate Elektronik.

The ULTIMETER Anemometer/Wind Vane (“wind sensor”) is a patented, uniquely all-digital design containing two magnetic switches. Unlike conventional wind sensors, the ULTIMETER Anemometer’s patented digital design has no potentiometer or other friction contacts to wear out. It features bearings that are virtually corrosion proof, with self-lubricating Delrin® races and surgical steel balls. The precision-molded housing of UV-resistant Lexan® will resist the harshest elements for many years.

• Extremely Reliable
• No friction contacts to wear out
• Elegantly simple for longevity and reliability
• Top quality electrical components – two ultra-reliable, glass enclosed, hermetically sealed, magnetically operated reed switches
• Top quality mechanical components – UV resistant Lexan® molded parts, corrosion resistant bearings with Delrin races and surgical stainless steel balls
• Can be taken apart and reassembled for cleaning, if necessary, without tools and without affecting accuracy.
• Digital pulse data – resists electrical interference from radio transmitters or other sources
• Can operate over long distances with full accuracy, thanks to all-digital design.

The post WSF-10030SU
Anemometer/Wind Vane Standard for... first appeared on EgeRate Elektronik.