Hans Schmidt MAZD and MBZD - EgeRate Elektronik https://www.egerate.com Tue, 11 Apr 2023 11:47:36 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans Schmidt MAZD and MBZD - EgeRate Elektronik https://www.egerate.com 32 32 MAZD and MBZD Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/mazd-and-mbzd-tension-sensor/ Tue, 11 Apr 2023 11:39:54 +0000 https://www.egerate.com/?post_type=product&p=13120 4 Tension ranges available
from 0 - 100 cN up to 0 - 1000 cN
Online tension sensor for measuring small tensions of threads and fibres up to 1000 tex, as well as thin wires up to 0.3 mm Ø

Compact sensor with two different designs for continuous tension measuring in wire and textile industry

Tension meter can be fixed on a mounting rail DIN EN 60715

The post MAZD and MBZD
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features MAZD
  • Tension sensor MAZD with integrated measuring amplifier and high accuracy of 2 % FS
  • gently material path, it is guide over the rollers
  • Material incoming / outgoing angle 35° min
  • Various output signals
    – analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
    – analog DMS: mV/V (optional)
  • Universal mounting possibility – easy to install, even afterwards, on existing machines:
    The sensor can be mounted using the three threads at the underside of the housing body. Alternative it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
    Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – loadcell with high quality strain gauge bridge

Standard Features

  • Supplied with a 2 m shield cable with open Ends (other cable length on request)
  • Tension sensor with aluminium housing
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

 Special Features MBZD

  • Tension sensor MBZD with integrated measuring amplifier and high accuracy of 2 % FS
  • Typical material path – warping the 3 rollers
  • Various output signals
    – analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
    – analog DMS: mV/V (optional)
  • Universal mounting possibility – easy to install, even afterwards, on existing machines:
    The sensor can be mounted using the three threads at the underside of the housing body. Alternative it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – loadcell with high quality strain gauge bridge

The post MAZD and MBZD
Tension Sensor first appeared on EgeRate Elektronik.

]]>