Hans-Schmidt Gerginlik Ölçüm Cihazı - EgeRate Elektronik https://www.egerate.com Wed, 19 Apr 2023 12:36:09 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans-Schmidt Gerginlik Ölçüm Cihazı - EgeRate Elektronik https://www.egerate.com 32 32 RTM-400 Belt Tension Meter https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/tension-meters-according-to-application/rtm-400-belt-tension-meter/ Wed, 19 Apr 2023 10:49:28 +0000 https://www.egerate.com/?post_type=product&p=13360 Measuring range max. 10 - 800 Hz
Trummeter for measuring belt tension and for control the strand force of V-belts, tooth belts, power belts or similar. The optimal life time of a belt is depending on the correct belt tension.

The measured value is shown as frequency in Hz or strand force in N.

Non-contact measuring occurs by infrared light

The post RTM-400
Belt Tension Meter first appeared on EgeRate Elektronik.

]]> Special Features
  • Measuring principle: Frequency measurement by LED light while the belt is not moving. The belt is toughed by hand to create vibration.
  • The readings can be displayed as frequency (Hz) or strand force (N or lbf)
  • The belt tension meter RTM-400 includes a display unit as well as 2 measuring probes:
    – plug in probe for one-hand operation
    – measuring probe with cable for limited access space
  • For determinating the belt force in Newton, 2 parameters are needed. Thereby the following restrictions are obtained:
    – free strand length 9.99 m
    – belt mass up to 9.999 kg/m
  • Belt tension meter with measuring range 10 – 800 Hz
  • Belt tension tester with multilingual operator guidance and display (German, English, French, Italian, Spanish, Portuguese, Swedish, Norwegian, Danish, Finnish)
  • Manufacturer`s calibration report is included

Standard Features

  • Belt tension devise for easy and safe operation
  • Trummeter with rugged, handy plastic housing
  • Microprocessor controlled belt tension meter
  • Belt tension tester for measurements with highest precision

 Available Models

Model Measuring Range
RTM-400 max. 10 – 800 Hz

The post RTM-400
Belt Tension Meter first appeared on EgeRate Elektronik.

]]> ZD2 Tension Meter https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/hand-held-mechanical/zd2-tension-meter/ Wed, 05 Apr 2023 13:26:00 +0000 https://www.egerate.com/?post_type=product&p=12732 6 Tension ranges available
from 3 - 30 cN up to 20 - 300 cN
Economical mechanical tension meter for checking fibers, threads and fine wires with low tensions up to max. 300 cN

Universal measuring instrument with large guide rollers groove Ø 12 mm

Tension Meter for a variety of applications in the textile and wire industry

The post ZD2
Tension Meter first appeared on EgeRate Elektronik.

]]> Special Features
  • The analog display of tension meter ZD2 shows changing and fluctuating tensions fast and enables an optimal process adjustment
  • Filament guide and roller shifting mechanism ensure easy acquisition of the running material
  • Large, easy to read scale (54 mm Ø)
  • Light weight

Standard Features

  • Everything in operator’s view:
    – the guide rollers
    – the measured material
    – the readings
  • Ball-bearing mounted, V-grooved guide rollers
  • Each instrument is individually calibrated for highest accuracy
  • Tension meter with high-strength plastic housing
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model Tension Range
 Measuring Head Width*
 SCHMIDT Calibration Material**
ZD2-30 3 – 30 cN 63 mm PA: 0.12 mm Ø
ZD2-50 5 – 50 cN 63 mm PA: 0.12 mm Ø
ZD2-100 10 – 100 cN 63 mm PA: 0.12 mm Ø
ZD2-150 20 – 150 cN 63 mm PA: 0.12 mm Ø
ZD2-200 20 – 200 cN 63 mm PA: 0.12 mm Ø
ZD2-300 20 – 300 cN 63 mm PA: 0.20 mm Ø

Other tension ranges available on request.
Other units of measure available, such as g.
* Width of filament guide
** Suitable for 95 % of applications – PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied

The post ZD2
Tension Meter first appeared on EgeRate Elektronik.

]]> ZF2 Tension Meter https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/hand-held-mechanical/zf2-tension-meter/ Wed, 05 Apr 2023 12:14:10 +0000 https://www.egerate.com/?post_type=product&p=12722 7 Tension ranges available
from 1 - 5 cN up to10 - 100 cN
Economical mechanical tension meter for checking fibres, threads and fine wires with low tensions up to max. 100 cN

Most popular tension meter in the textile industry with analog display for low tensions

Slim filament guide with small guide rollers for limited access space

The post ZF2
Tension Meter first appeared on EgeRate Elektronik.

]]> Special Features
  • The analog display of tension meter ZF2 shows changing and fluctuating tensions fast and enables an optimal process adjustment
  • Filament guide and roller shifting mechanism ensure easy acquisition of the running material
  • Large, easy to read scale (54 mm Ø)
  • Light weight

Standard Features

  • Everything in operator’s view:
    – the guide rollers
    – the measured material
    – the readings
  • Ball-bearing mounted, V-grooved guide rollers
  • Each instrument is individually calibrated for highest accuracy
  • Housing made of high-strength plastic
  • Certificate of Compliance with the order 2.1 according DIN EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according DIN EN 10204 with calibration report

Available Models

Model Tension Range
 Measuring Head Width*
 SCHMIDT Calibration Material**
ZF2-5 1 – 5 cN 43 mm thread: 25 tex
ZF2-10 1 – 10 cN 43 mm thread: 25 tex
ZF2-12 1 – 12 cN 43 mm thread: 25 tex
ZF2-20 2 – 20 cN 43 mm thread: 25 tex
ZF2-30 3 – 30 cN 43 mm PA: 0.12 mm Ø
ZF2-50 5 – 50 cN 43 mm PA: 0.12 mm Ø
ZF2-100 10 – 100 cN 43 mm PA: 0.12 mm Ø

Other tension ranges available on request.
Other units of measure available, such as g.
* Width of filament guide
** Suitable for 95 % of applications – PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

The post ZF2
Tension Meter first appeared on EgeRate Elektronik.

]]>