NOTE: Shown with Optional Knurled Aluminum Wheel – LMA-3

The post DLM-107A
Digital Length Meter first appeared on EgeRate Elektronik.

In non-contact mode the tachometer measures RPM up to 99,999 RPM at distances up to 13 feet or 500 cm. The DT-2100 can also measure contact RPM, surface speed, or length using the supplied screw-on adapter.

Data logging can be set for single point or continuous logging. Single data points as well as statistics (Max, Min, Average) can be stored in the built-in memory and recalled to the display. Often users need to adjust machinery during testing, with the DT-2100 you can mount it on a tripod, select continuous logging and adjust machinery as necessary. After the test, you can easily review the data on the DT-2100’s display or download to a computer using the optional Windows Software.

The DT-2100 is supplied as a complete kit with 2 cone tip adapters, funnel tip adapter, shaft extension, 6 inch circumference surface speed wheel, reflective tape, 2 AA batteries … all supplied in a foam-fitted carrying case. A NIST-Traceable Calibration Certification is optionally available.

 Complete Kit

The DT-2100 is supplied as a complete kit with tachometer, 2 cone adapters, funnel adapter, 3.5” extension shaft, surface speed wheel (6” circumference), reflective tape, 2 AA batteries, contact adapter in a foam-fitted carrying case

The post DT-2100
Tachometer with USB Output – Co... first appeared on EgeRate Elektronik.

The PLT-5000 is extremely easy to operate and quickly converts from non-contact operation to contact operation by screwing the contact adapter in place. In addition to RPM’s, a wide variety of engineering units for surface speed and length are user-selected via the front panel buttons. Units include; feet per minute, meters/min, yards per minute, inches per minute and more.

A built-in memory stores up to 10 measurements plus minimum, maximum, average and last.

 Complete Kit

The PLT-5000 comes as a complete kit with storage case, 6″ circumference wheel, Funnel Adapter, Cone Adapter, Contact Adapter, three (3) AA Batteries, reflective tape, NIST certificate and instruction manual.

The post PLT-5000
Combination Contact and Non-Contact ... first appeared on EgeRate Elektronik.

NSN 6680-01-378-6490 (DT-205LR)
NSN 6680-01-507-0818 (DT-207LR) DT-207LR-12 = Avtron M740

 LCD Display vs LED Display

 Complete Kit

All models are supplied as a complete kit including the tachometer, reflective tape, screw-in contact adapter, 2 cone tips, funnel tip, shaft extension, surface speed wheel, two AA batteries, NIST traceable calibration certificate and an operating instruction manual – all supplied in a foam-fitted carrying case.

Note: On DT-205LR-12 and DT-207LR-12 models 12″ circumference wheel is supplied instead of 6″ version

The post DT-205LR – DT-207LR
Combination Contact... first appeared on EgeRate Elektronik.

The CDT-2000HD’s rugged construction, portability and outstanding features make It an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications.

 Applications

 Measuring Ranges

 LCD Display

Units of Measure Indicators show the user-selected units of measure.

Contact Indicator shows if contact or non-contact operation is selected.

Low Battery Indicator alerts the operator if the batteries are low.

On-Target Indicator confirms that the measurements are reliable.

Memory Indicators are illuminated when the maximum, minimum, average and last readings are recalled to the display for viewing.

 Complete Kit

The CDT-2000HD includes the Tachometer, Slide-In Contact Adapter, 6″ & .1m Surface Speed Wheels, Cone Tip, Funnel Tip, Extension Shaft, Reflective Tape, Two (2) AA Batteries (1.5 V), Calibration Certificate and Operating Instruction Manual — all supplied in a foam-fitted, hard-plastic Carrying Case.

The post CDT-2000HD
Combination Contact and Non-Contac... first appeared on EgeRate Elektronik.

A combination Contact & Non-Contact model, the CDT-2000HD, is also available. Click here for data sheet.

Also known as Testo 465, Redpoint A5-1100

 LCD Display

Low Battery Indicator alerts the operator if the batteries are low.

On-Target Indicator confirms that the measurements are reliable.

Memory Indicators are illuminated when the maximum, minimum, average and last readings are recalled to the display for viewing.

 Complete Kit

The CDT-1000HD complete kit includes the Tachometer, Reflective Tape, Two (2) AA Batteries (1.5 V), Operating Instruction Manual and Traceable certificate — all supplied in a foam-fitted, hard-plastic Carrying Case.

The post CDT-1000HD
Non-Contact Tachometer first appeared on EgeRate Elektronik.

Certificates: CE, UKCA

• Auto range
• Up to 99999 display; overload diaplay, “OL”
• RPM measurement and revolution count
• Max/Min, data hold
• Singal trigger/laser-on indication
• Low battery/auto power off indication
• LCD backlight

The post UT373
Mini Tachometer first appeared on EgeRate Elektronik.

Certificates: CE, UKCA

• 5 digits LCD screen, RPM/count and time dual display
• MAX/MIN/AVG/normal modes
• Adjustable sampling rate (0.5-255s)
• Auto power off (cancelable)
• Optional (on/off) laser pointer
• Clock and time setting
• Data hold, low power consumption, continuous work for 40hrs

The post UT370 Series
Tachometers first appeared on EgeRate Elektronik.

Certificates: CE, UKCA

Languages: EN, FR, DE, IT, ES, SV, PL, CZ

• Contact and non-contact measurements
• MAX/MIN/AVG/HOLD
• Rotatable LCD backlight screen
• Unit conversion
• Bluetooth APP
• Auto power off
• Data storage
• Two measurement buttons

The post UT372D
2-in-1 Tachometer first appeared on EgeRate Elektronik.

• Yarn length meter LMC for measuring cm and LMI for measuring in inch
• Basic unit with Start/Stop button for manual, easy and quick measurements
• Precision, ball-bearing mounted wheel is recessed into an adjustable slot on the rear side
• Material slip is eliminated by maximum enlacement of material (approx. 120°) with rubber coated wheel

It is stationary mounted between filament break monitors and filament guides using the supplied magnetic base.

 Standard Features

• Easy to operate
• Magnetic base for quick installation; it is stationary mounted on the cylinder ring between filament break monitors and the filament guides.
• Battery operated length meter

 Available Models

The post LMC and LMI
Yarn Length Meter first appeared on EgeRate Elektronik.