| Model | Frequency Range | Dynamic Range | Overload Rating | Sensor Response | Maximum SWR | ||
| Impedance Connector |
(Low Bandwidth) | Peak Pwr Rng** CW Pwr Rng Int. Trigger Range |
Pulse/Continuous | Fast Risetime (Bandwidth) | Slow Risetime (Bandwidth) | Frequency | SWR @ 0 dBm |
| For use with models 4500B, 4540 and 4530* | |||||||
| 57006 50 ohm N (M) |
0.5 – 6 GHz (0.05 – 6 GHz) |
-50 to +20 dBm -60 to +20 dBm -40 to +20 dBm |
1 W for 1µs 200 mW |
<7 ns (70 MHz typical) |
<10 µs (350 kHz) |
0.05 – 6 GHz | 1.25 |
| 59318 50 ohm N (M) |
0.5 – 18 GHz (0.05 – 18 GHz) |
-24 to +20 dBm -34 to +20 dBm -10 to +20 dBm |
1 W for 1µs 200 mW |
<10 ns (50 MHz typical) |
<10 µs (350 kHz) |
0.05 – 2 GHz 2 – 16 GHz 16 – 18 GHz |
1.15 1.28 1.34 |
| 59340 50 ohm K (M) |
0.5 – 40 GHz (0.05 – 40 GHz) |
-24 to +20 dBm -34 to +20 dBm -10 to +20 dBm |
1 W for 1µs 200 mW |
<10 ns (50 MHz typical) |
<10 µs (350 kHz) |
0.05 – 4 GHz 4 – 38 GHz 38 – 40 GHz |
1.25 1.65 2.00 |
| For use with models 4400, 4500, 4400A, and 4500A analyzers. Model 4530 w/1 GHz calibrator Model 2530 | |||||||
| 56318 50 ohm N (M) |
0.5 – 18 GHz | -24 to +20 dBm -34 to +20 dBm -10 to +20 dBm |
1 W for 1µs 200 mW |
<15 ns (35 MHz) |
<200 ns (1.75 MHz) |
0.5 – 2 GHz 2 – 16 GHz 16 – 18 GHz |
1.15 1.28 1.34 |
| 56326 50 ohm K (M) |
0.5 – 26.5 GHz | -24 to +20 dBm -34 to +20 dBm -10 to +20 dBm |
1 W for 1µs 200 mW |
<15 ns (35 MHz) |
<200 ns (1.75 MHz) |
0.5 – 2 GHz 2 – 4 GHz 4 – 18 GHz 18 – 26.5 GHz |
1.15 1.20 1.45 1.50 |
| 56518 50 ohm N (M) |
0.5 – 18 GHz | -40 to +20 dBm -50 to +20 dBm -27 to +20 dBm |
1 W for 1µs 200 mW |
<100 ns (6 MHz) |
<300 ns (1.16 MHz) |
0.5 – 2 GHz 2 – 6 GHz 6 – 16 GHz 16 – 18 GHz |
1.15 1.20 1.28 1.34 |
| For use with models 4400, 4500, 4400A, 4500A, 4500B, 4530 and 4540 | |||||||
| 57518 50 ohm N (M) |
0.1 – 18 GHz (0.05 – 18 GHz) |
-40 to +20 dBm -50 to +20 dBm -27 to +20 dBm |
1 W for 1µs 200 mW |
<100 ns (6 MHz) |
<10 µs (350 kHz) |
0.05 – 2 GHz 2 – 16 GHz 16 – 18 GHz |
1.15 1.28 1.34 |
| 57540 50 ohm K (M) |
0.1 – 40 GHz (0.05 – 40 GHz) |
-40 to +20 dBm -50 to +20 dBm -27 to +20 dBm |
1 W for 1µs 200 mW |
<100 ns (6 MHz) |
<10 µs (350 kHz) |
0.05 – 4 GHz 4 – 38 GHz 38 – 40 GHz |
1.25 1.65 2.00 |
| For use with 4500, 4400, and 4530 | |||||||
| 56218 50 ohm N (M) |
30 MHz – 18 GHz | -24 to +20 dBm -34 to +20 dBm -10 to +20 dBm |
1 W for 1µs 200 mW |
<150 ns (3 MHz) |
<500 µs (700 kHz) |
0.03 – 2 GHz 2 – 6 GHz 6 – 18 GHz |
1.15 1.20 1.25 |
| For use with 4500 and 4400 | |||||||
| 56526 50 ohm K (M) |
500 MHz – 26.5 GHz | -40 to +20 dBm -50 to +20 dBm -27 to +20 dBm |
1 W for 1µs 200 mW |
<100 ns (6 MHz) |
<300 µs (1.16 MHz) |
0.03 – 2 GHz 2 – 6 GHz 4 – 18 GHz 18 – 26.5 GHz |
1.15 1.20 1.45 1.50 |
*4530 support only sw version 20070215 and later.
**For pulse signals only.