SDS1152CML+ Dijital Osiloskop
150Mhz 2 Kanal 8-bit Resolotion

Siglent SDS1152CML+, 150 MHz bant genişliğine ve 1 GSa/s’ye kadar gerçek zamanlı örnekleme hızına sahip, 2 kanallı dijital bir osiloskoptur.

Ayrıntılı dalga şekli analizi için kanal başına 2 Mpts’e kadar bellek derinliği sunar ve 800 × 480 çözünürlüklü 7 inç TFT-LCD ekrana sahiptir.

Osiloskop; Edge (Kenar), Pulse (Darbe), Video, Slope (Eğim) ve Alternate (Alternatif) tetikleme modlarını desteklemektedir.

Ayrıca toplama, çıkarma, çarpma, bölme ve FFT (Hızlı Fourier Dönüşümü) gibi matematiksel fonksiyonları da destekler.

Cihaz, 6 haneli frekans sayacı içermekte olup, uzaktan kontrol için USBTMC protokolü ve SCPI komutlarını desteklemektedir.

Temel Özellikler:
– 150 MHz bant genişliği
– Gerçek zamanlı örnekleme hızı 1 GSa/s’ye kadar.
– Kanal başına 2 Mpts’ye kadar Bellek Derinliği
– Tetikleme türleri: Edge, Pulse, Video, Slope, Alternate
– Dalga formu matematik fonksiyonları: addition, subtraction, multiplication, division, FFT
– 800*480 çözünürlüğe sahip 7 inç TFT-LCD ekran

ÖZELLİKLER

Deep Memory Mode With One Button Zoom, See the Overall and Details at the Same Time

The SDS1102CML+/SDS1152CML+ have deep memory mode with memory depth up to 2 Mpts. And the SDS1000CML+/DL+ has the function of one button Zoom. It can zoom in the part of signal interested in and makes it extremely convenient to observe, measure and analyze the signal.

In deep memory mode, you can acquire longer signals at a higher sampling rate. And then use the one button Zoom function to quickly zoom in the interested part, ensuring fine waveform resolution.

Powerful Data Analysis and Save Capabilities

The SDS1000CML+/DL+ series supports 32 kinds of parameters measurement, relating to voltage, time and delay. You can configure 5 kinds of parameters to display at the screen bottom or to display all measurements at the same time.

The SDS1000CML+/DL+ series supports five kinds of mathematical operations: +, -, *, /, FFT. The results, waveform data and screenshots can be saved to the USB memory by simply press the Print button.

Abundant Interfaces and Remote Control

The interfaces supported by the SDS1000CML+/DL+ series include
-USB Host   Save data and pictures to external USB memory
-USB Device  Connect to PC and perform remote control via free EasyScope software
LAN (VXI-11)  Provide internet capability to perform remote control such as send SCPI commands
Pass/Fail interface   Output pulses during Pass/Fail test

MODEL TABLOSU

Model Bandwıdth Channels Real tıme samplıng rate Capture rate Memory depth
SDS1072CML+ 70 MHz 2+EXT 1 GSa/s – 2 Mpts
SDS1102CML+ 100 MHz 2+EXT 1 GSa/s – 2 Mpts
SDS1152CML+ 150 MHz 2+EXT 1 GSa/s – 2 Mpts

DATASHEET

SDS1000CML+ Series QuickStart