CT-1860 / PM-1860-H1
Cable Tester / HDMI Response Module

Outline of product

By connecting the high speed transmission cable in a loop, CT-1860 checks the transmission characteristics at the physical layer easily.
By using HDMI Response Module, pass / fail judgment is done by comparing with the master cable or by the standard value set by the user. This product is useful for the development and production lines of HDMI cables.
The frequency characteristics are displayed on the front screen of the CT-1860, and PC application can be used as well.

 

CT-1860　Cable Tester

  • Supports various cable measurements by replacing the performance module. (new module plan: latency measurement, eye-diagram monitor, and frequency response measurement of USB-C, DisplayPort and LAN.)
  • Operation by using front buttons and LCD. Graphical display of frequency characteristics. Save measurement results.
  • Operation by PC application (SP-1860) by LAN.
  • Display measuring result of S parameter (S21) of 4-terminal network.

PM-1860-H1　HDMI Response Module

  • Evaluation of transmission characteristics for each TMDS line.(AOC, Metal)
  • Output amplitude can be changed by user.
  • Broad bandwidth measurement of 100MHz-15GHz. (HDMI2.1 FRL 48Gbps can be tested.)
  • Wiring check and voltage display of control lines (DDC/HPD/CEC).
  • Measurement of voltage and current consumption value of +5V line.
  • Optional Calibration Cable (CA-1860-HDMI)

CT-1860 does not work alone. (It needs performance module.)

CT-1860 Front Display (HDMI Response module mounted)
You can switch the screen to check the settings, frequency characteristics, TMDS line, and control lines.

 

 

PC Application (HDMI Response module mounted)
You can switch the screen to check the settings, frequency characteristics, TMDS line, and control lines.

SPECIFICATIONS

 

CT-CT-18601860
Power Requirements AC 100V-240V　50/60Hz
Power Consumption 47W MAX
Dimensions 210(W)×88(H)×235(D)mm (Excluding Protrusions）
Weight Approx. 2.1kg (without PM-1860-H1)
External Control LAN、TRIGGER
1860
Power Requirements DC +12V (dedicated DC adapter)
Power Consumption 18W MAX
Dimensions 132.8(W)×35(H)×132.8(D)mm (Excluding Protrusions）
Weight Approx. 0.5 kg
External Control USB (available when PM-1860-H1 is used alone.)
 Common
Operating Temperature Range +5 to 40℃
Operating Humidity Range 20 to 80%RH (No Condensation)

DOCUMENT