Torkmetre - EgeRate Elektronik https://www.egerate.com Tue, 31 Jan 2023 13:38:41 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Torkmetre - EgeRate Elektronik https://www.egerate.com 32 32 NTS-6 series (S1/S2/S5/S10/S20) Rotate Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/nts-6-series-s1-s2-s5-s10-s20-rotate-torque-tester/ Thu, 15 Dec 2022 11:42:12 +0000 https://www.egerate.com/?post_type=product&p=7889 Measurement of rotation starting torque and rotating load torque
Measure rotational torque of finished parts during assembly of equipment with rotating function.
As the output shaft self-rotates, catch load fluctuation of the rotating body by built-in sensor.
It can be measured rotational start torque of the rotated body (not rotating itself, no power) and load torque during rotation.
(Printer, copy machine, zooming lens, door knob mechanism, hinge mechanism etc ...)

The post NTS-6 series (S1/S2/S5/S10/S20)
Rotate Torque Tester first appeared on EgeRate Elektronik.

]]>
  • Three types of measurement mode
  • Enable to set upper & lower limit and pass/fail judgment by lamp
  • Adapted to various torque ranges with 5 types
  • OK · NG output
  • USB shape of Data output
  • External start signal input
  • Easy creation of torque waveform with real time output
  • The lineup of the NTS-6 series is NTS-6/S-1, NTS-6/S-2, NTS-6/S-5, NTS-6/S-10, NTS-6/S-20

    • The post NTS-6 series (S1/S2/S5/S10/S20)
    Rotate Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         DI-1M-IP Series Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/di-1m-ip-series-torque-tester/ Wed, 14 Dec 2022 17:37:32 +0000 https://www.egerate.com/?post_type=product&p=7845 Suitable for Impact-based tool management
    High accuracy, and portable. It is installed on the work line and is effective for periodic inspection of the tool.
    The blow counter displays number of blows and value of torque, and LED display which is brighter and easier to read.
    Besides, it can be used for the management of the torque wrench · nut runner.

    The post DI-1M-IP Series
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • Blow counter shows number of blows and value of torque
  • Enable to inspect operating torque of manual preset type torque wrench etc. in peak down mode
  • Auto power-off function · Autoclear function are installed
  • Data acquisition software can be downloaded for free
  • The lineup of the DI-1M-IP series is DI-1M-IP50, DI-1M-IP200

    • The post DI-1M-IP Series
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         DWT-200 Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/dwt-200-torque-tester/ Wed, 14 Dec 2022 17:17:45 +0000 https://www.egerate.com/?post_type=product&p=7838 Suitable for daily inspection of torque wrench on site
    Dedicated for managing Torque wrench
    Enable to check the operating torque by easy operation.
    Visible display due to LED light.
    Include only necessary functions to keep the lowest cost.

    The post DWT-200
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • Equipped with “PP” mode for measuring actual torque and “PD” mode for measuring the torque that the torque wrench operates
  • Attached adapter for converting detection unit to  9.5

    • The post DWT-200
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         DIS-IP series Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/dis-ip-series-torque-tester/ Wed, 14 Dec 2022 17:13:07 +0000 https://www.egerate.com/?post_type=product&p=7834 Suitable for managing various manual torque wrench & torque drivers
    Standard model for static torque measurement
    Bigger characters size and enhance user convenience.
    Enable to be installed in a small space due to a separate type.
    Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

    The post DIS-IP series
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • Show “Measurement mode” “Measurement unit” Indication of “maximum, minimum, average”
  • Switchable measurement unit
  • Enable to save 5 sets of settings such as upper limit and lower limit
  • 800 items of memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free
  • The lineup of the DIS-IP series is DIS-IP05, DIS-IP5, DIS-IP50, DIS-IP200, DIS-IP500

    • The post DIS-IP series
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         NDI-800CN/80CN Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/ndi-800cn-80cn-torque-tester/ Wed, 14 Dec 2022 17:09:03 +0000 https://www.egerate.com/?post_type=product&p=7830 Suitable for daily inspection of electric screw driver
    Progress of Visibility, Usability and Connectability
    The easy-to-read color display, addition of a clock function, and simple operation with dedicated software enable more advanced management.
    Efficient measurement without unwinding work by "OW joint".

    The post NDI-800CN/80CN
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • Easy set-up of tester on PC
  • Easy search of memory data
  • Enable to be powered directly by AC adapter
  • Enable to check pass/fail threshold value during measurement
  • Color display depending on measurement value
  • Software can be downloaded for free
  • Include “Screw Cube”-measuring jig for manual tools

    • The post NDI-800CN/80CN
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         DI-9M-8/08 Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/di-9m-8-08-torque-tester/ Wed, 14 Dec 2022 17:01:15 +0000 https://www.egerate.com/?post_type=product&p=7826 Suitable for daily inspection of electric screw driver
    Using "OW joint" (joint which is unnecessary to rewind)
    Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings by switch channels even if the tightening term changes.
    Due to "OW Joint", able to mesures effectively without rewinding.

    The post DI-9M-8/08
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • Show “Measurement mode”, “Measurement unit”, and “maximum, minimum, average”
  • Switchable measurement unit
  • 800 items of Memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free
  • Include “Screw Cube”-measuring jig for manual tools

    • The post DI-9M-8/08
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         WDI SeriesTorque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/wdi-seriestorque-tester/ Wed, 14 Dec 2022 16:42:56 +0000 https://www.egerate.com/?post_type=product&p=7816 New standard torque tester
    50 years of torque tester manufacturing.
    WDI-10HR　WDI-100HR　WDI-250
    You can manage the electric screwdriver / manual torque driver and wrench.

    The post WDI Series
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • Easy-to-understand color display.
  • 10HR / 100HR is capable of high-resolution measurement with 1/10 the normal resolution.
  • Equipped with data output via USB / RS232C.
  • Clear signals and various commands can be sent from a personal computer or PLC.
  • Measurement joints can be selected according to the management method and tool characteristics.
  • Manual tool measurement jig A screw cube is attached according to the measurement band.
  • A storage case is available as an option.
  • The WDI series includes WDI-100HR, WDI-10HR, and WDI-250.
  • External dimensions–160(W) 143(D) 58(H) mm

    • The post WDI Series
    Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         WDISR RL Series Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/wdisr-rl-series-torque-tester/ Wed, 14 Dec 2022 16:08:31 +0000 https://www.egerate.com/?post_type=product&p=7813 Separate type digital torque driver
    The detector is small and lightweight. For managing small torque.
    Since it is a built-in battery type, it can be used for a wider range of purposes.
    It works with a personal computer or PLC to manage torque measurement more highly.

    The post WDISR
    RL Series Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • A color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • The pass / fail judgment is displayed in color for easy understanding.
  • Built-in battery drive.
  • The WDISR-RL series includes WDISR-RL005, WDISR-RL05, WDISR-RL6, and WDISR-RL10.

    • The post WDISR
    RL Series Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         WDISR IPS Series Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/wdisr-ips-series-torque-tester/ Wed, 14 Dec 2022 16:05:09 +0000 https://www.egerate.com/?post_type=product&p=7809
    Built-in battery type. Successor model of DIS-IPS series
    For managing automatic and semi-automatic tools
    It works with a personal computer or PLC to manage torque measurement more highly.
    Can be installed to manage various torque tools with a small detector.

    The post WDISR
    IPS Series Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • A color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • The pass / fail judgment is displayed in color for easy understanding.
  • Built-in battery drive.
  • Various commands can be input from PLC or PC.
  • The WDISR-IPS series includes WDISR-IPS05C, WDISR-IPS5C, and WDISR-IPS20CL.T

    • The post WDISR
    IPS Series Torque Tester     first appeared on EgeRate Elektronik.

    ]]>         WDISR IP Series Torque Tester https://www.egerate.com/urun/mekanik/kuvvet-olcum/tork-sensorleri/wdisr-ip-series/ Wed, 14 Dec 2022 16:00:06 +0000 https://www.egerate.com/?post_type=product&p=7805 Manual torque tool management / built-in battery type
    For managing various manual torque drivers and wrenches
    It works with a personal computer or PLC to manage torque measurement more highly.
    For managing manual torque drivers and wrenches.
    The "DIS series" has become easier to use and has higher performance.

    The post WDISR
    IP Series Torque Tester     first appeared on EgeRate Elektronik.

    ]]>
  • Color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • A series of diverse lineups from up to 500mN・m (0.5N・m) to 1500N・m.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • Pass / fail judgment is clearly displayed in color.
  • Built-in battery drive.
  • The WDISR series includes WDISR-IP05, WDISR-IP5, WDISR-IP50, WDISR-IP200, WDISR-IP500, and WDISR-IP1500.

    • The post WDISR
    IP Series Torque Tester     first appeared on EgeRate Elektronik.

    ]]>