Hans Schmidt FSR-422 - EgeRate Elektronik https://www.egerate.com Wed, 19 Apr 2023 10:19:39 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans Schmidt FSR-422 - EgeRate Elektronik https://www.egerate.com 32 32 FSR-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/fsr-422-tension-sensor/ Tue, 18 Apr 2023 09:39:27 +0000 https://www.egerate.com/?post_type=product&p=13227 5 Tension ranges available
from 0 - 10 N up to 0 - 200 N
Stationary electronic tension sensor for flexible material, as wires, thin ropes and cable up to 10 mm Ø, as well as linear materials up to 10 mm width

Large, hardened guide rollers for minimized material deflection with 29.5 mm or 70 mm groove Ø

Tension sensor with RS-422 output for multi station system and connection to a with PC.
Single roller system for mounting at an existing deflection pulley.

The post FSR-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor FSR-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Sensor for installation at an existing deflection pulley; the in- and outcoming angle β has to be 20° or more.
  • Ball-bearing mounted steel or aluminium guide rollers 29.5 mm and 70 mm groove Ø,
    – V-grooved (for material with max. 4 mm Ø)
    – U-grooved (for material with 3 up to 10 mm Ø)
    – tape grooved (for material with max. width of 10 mm)
  • Easy mounting of customer provided rollers – please contact us!
  • Easy installation, even afterwards, on existing machines
  • 2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out: long hole R 19 mm, length 54 mm)
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge
  • Tension sensor with mechanical overload protection

Standard Features

  • Control lamp shows operative mode availability
  • Tension sensor FSR-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Nominal Load
FSR-10N-422 0 – 10 N
FSR-20N-422 0 – 20 N
FSR-50N-422 0 – 50 N
FSR-100N-422 0 – 100 N
FSR-200N-422 0 – 200 N
FSR-500N-422 0 – 500 N

The post FSR-422
Tension Sensor first appeared on EgeRate Elektronik.

]]>