Hans Schmidt FSH-422 Tension Sensor - EgeRate Elektronik https://www.egerate.com Wed, 19 Apr 2023 10:29:06 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans Schmidt FSH-422 Tension Sensor - EgeRate Elektronik https://www.egerate.com 32 32 FSH-422 Tension Sensor https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/stationary-electronic/fsh-422-tension-sensor/ Tue, 18 Apr 2023 08:41:24 +0000 https://www.egerate.com/?post_type=product&p=13219 6 Tension ranges available
from 0 - 1000 cN up to 0 - 100.00 daN
Stationary electronic tension sensor for flexible material as wires, thin ropes and cables up to 15 mm Ø, as well as linear, flat material up to 10 mm width

Large, hardened guide rollers for minimized material deflection

Tension sensor with RS 422 output for multi station system and connection to a with PC

The post FSH-422
Tension Sensor first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension sensor FSH-422 with integrated microprocessor controlled measuring amplifier and RS-422 interface for multi station system
  • Ball-bearing mounted guide rollers,
    – V-grooved (for material with max. 4 mm Ø)
    – U-grooved (for material with 3 up to 15mm Ø)
    – tape grooved (for material with max. width of 10 mm)
  • Easy installation, even afterwards, on existing machines
  • 2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out: longhole R 19 mm, length 54 mm)
  • Easy calibration to customized material by operator – zero and gain calibration is required
  • Measuring principle – load cell with high quality strain gauge bridge
  • Tension sensor with mechanical overload protection

Standard Features

  • Control lamp shows operative mode availability
  • Tension sensor FSH-422 with aluminium housing
  • CAT 5 cables are used for data transfer
  • Required power supply +15…24 V DC (regulated)
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS-422 interface:

  • Up to 24 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS-232 using a converter (RS-422 – RS-232).
  • The RS-422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 Available Models

Model Tension Range
 Measuring Head Width*
 SCHMIDT Calibration Material**
FSH-1000-422 0 – 1000 cN 150 mm PA: 0.30 mm Ø
FSH-2000-422 0 – 2000 cN 150 mm PA: 0.50 mm Ø
FSH-5000-422 0 – 5000 cN 200 mm PA: 0.80 mm Ø
FSH-10K-422 0 – 10 daN 200 mm PA: 1.00 mm Ø
FSH-20K-422 0 – 20 daN 250 mm PA: 1.50 mm Ø
FSH-50K-422 0 – 50 daN 250 mm Stahlseil 1.50 mm Ø (7x7x0.20)
FSH-100K-422 0 – 100 daN 250 mm Stahlseil 3.00 mm Ø (6x7x0.30)

Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g or kg.
* Outer dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

The post FSH-422
Tension Sensor first appeared on EgeRate Elektronik.

]]>