Hans Schmidt ETB and ETX - EgeRate Elektronik https://www.egerate.com Fri, 07 Apr 2023 12:45:53 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans Schmidt ETB and ETX - EgeRate Elektronik https://www.egerate.com 32 32 ETB and ETX Tension Meter https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/hand-held-electronic/etb-and-etx-tension-meter/ Fri, 07 Apr 2023 11:23:35 +0000 https://www.egerate.com/?post_type=product&p=12876 5 Tension ranges available
from 0.3 - 100.0 cN up to 3 - 2000 cN

For fibers up to 2000 tex and Cu wire Ø 0.5 mm

Electronic tension meter for hard to reach and limited access space applications.
Available in two models: ETB (Basic unit) and ETX (with memory and outputs)

Hand-held instrument with guide rollers up to max. 2000 m/min

Tension meter with measuring head as small as possible

The post ETB and ETX
Tension Meter first appeared on EgeRate Elektronik.

]]> Special Features
  • Tension meter ETB and ETX with guide rollers mounted on long shafts to reach into tightest places
  • Hand-held instrument with ball-bearing mounted, V-grooved guide rollers up to 2000 m/min, for higher line speed use model ETPB or ETPX
  • The tension meter ETB and ETX has a coloured, backlight TFT display with 3 different display modes
    – numeric
    – numeric with live bargraph
    – numeric with graph (time-tension)
  • The display rotates in 90° steps for better reading
  • Automatic “Zero-Setting” in each measuring position using a special sensor technique
  • Selectable units of measurement: cN, g, N and lb
  • Very high data sampling rate (internal 1 kHz)
  • Storage of MIN, MAX, last reading, average and standard deviation per measuring interval
  • User-set MIN and MAX alarms with indication of TFT display if reading is out of limits
  • Adjustable electronic damping for better reading when tension fluctuates
  • 3 separate calibration material memory locations for custom calibrations
  • Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
  • Menu set-up in English or German language

Standard Features

  • Rugged aluminium housing
  • LiPo accumulator (approx. 20 hours continuous operation) with AC adapter
  • CE certified, interference resistant against static electrifications
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Additional Special Features Model ETX

  • The tension meter ETX can be connected to a PC using the USB interface to monitor readings constantly on a PC
  • Memory for 60.000 readings
  • 5 different memory modes can be selected by the operator:
    • Mode S: only statistical values per series are displayed
    • Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement
    • Mode C: continuous logging over a user set time and max. 999 series of measurement (2 Hz)
    • Mode F: as C with higher sampling rate (200 Hz)
    • Mode D: storage of single readings and statistic

Model ETX can be connected to a PC with the USB cable. With the software SW-TI3 »Tension Inspect 3« readings can be displayed, statistically analysed and saved. For more information see “Standard Accessories ETX”

 

 

 

 

Available Models

Model Model Measuring Range Resolution Measuring Head Width* SCHMIDT Calibration Material
ETB-100
 ETX-100 0.3 – 100.0 cN 0.1 cN 24 mm PA: 0.20 mm Ø**
ETB-200
 ETX-200 2.0 – 200.0 cN 0.1 cN 24 mm PA: 0.20 mm Ø**
ETB-500
 ETX-500 2.0 – 500.0 cN 0.1 cN 24 mm PA: 0.20 mm Ø**
ETB-1000
 ETX-1000 3 – 1000 cN 1 cN 38 mm PA: 0.30 mm Ø***
ETB-2000
 ETX-2000 3 – 2000 cN 1 cN 38 mm PA: 0.50 mm Ø***

* Outer distance between outside guide rollers
** Suitable for 95 % of applications – PA = Polyamide Monofilamente, calibrated with a running filament approx. 100 m/min
*** Suitable for 95 % of applications – PA = Polyamide Monofilamente, calibrated with a static filament

The post ETB and ETX
Tension Meter first appeared on EgeRate Elektronik.

]]>