Hans Schmidt DXP - EgeRate Elektronik https://www.egerate.com Thu, 06 Apr 2023 14:22:09 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Hans Schmidt DXP - EgeRate Elektronik https://www.egerate.com 32 32 DXP Tension Meter https://www.egerate.com/urun/mekanik/mekanik-olcum/gerginlik-olcum-cihazi/hand-held-mechanical/dxp-tension-meter/ Thu, 06 Apr 2023 14:15:38 +0000 https://www.egerate.com/?post_type=product&p=12824 3 Tension ranges available
from 10 - 50 cN up to 20 - 200 cN

With non-rotating ceramic pins for high line speeds up to max. 6000 m/min

Hand-held mechanical tension meter with measuring head as small as possible for limited access space. Only for textile applications!

Material slip is avoided by small flanges on each side of the pin

The post DXP
Tension Meter first appeared on EgeRate Elektronik.

]]> Special Features
  • The analog display of tension meter DXP shows changing and fluctuating tensions fast and enables an optimal process adjustment
  • Non-rotating ceramic pins permit line speeds up to max. 6000 m/min
  • The ceramic pins have on each side small flanges to guide the thread and to avoid slipping off the ceramic pins
  • Small measuring head width with of only 27 mm for measurements at positions with limited space
  • Length of measuring head approx. 64 mm
  • Roller shifting mechanism ensure easy acquisition of the running material
  • Built-in mounting holes permit fixed installation for continuous tension measurement
  • Turned-up outer finger edges guide the running filament into the roller grooves
  • Special finger support located on the rear side reduces the effort to move the outer roller assembly

Standard Features

  • Everything in operator’s view:
    – the guide rollers
    – the measured material
    – the readings
  • Each instrument is individually calibrated for highest accuracy
  • 41 mm Ø scale
  • Tension meter rugged aluminium housing
  • Certificate of Compliance with the order 2.1 according EN 10204
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Finger Support

We recommend mounting a finger support for higher tension ranges

 

Note

Tension meter DXP does not include a material thickness compensator

Available Models

Model Tension Range
 Measuring Head Width* X
 Measuring Head Width Y
 SCHMIDT Calibration Material**
DXP-50 10 – 50 cN 27 mm 44 mm PA: 0.12 mm Ø
DXP-120 20 – 120 cN 27 mm 44 mm PA: 0.12 mm Ø
DXP-200 20 – 200 cN 27 mm 44 mm PA: 0.12 mm Ø

 
Other tension ranges available on request.
Other units of measure available, such as g.
* Width of bracket assembly
** Suitable for 95 % of applications – PA = Polyamide Monofilament

The post DXP
Tension Meter first appeared on EgeRate Elektronik.

]]>