Boonton Wideband Peak Power Sensors - EgeRate Elektronik https://www.egerate.com Mon, 24 Jul 2023 13:12:01 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png Boonton Wideband Peak Power Sensors - EgeRate Elektronik https://www.egerate.com 32 32 Wideband Peak Power Sensors https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/rf-guc-olcum-cihazi/wideband-peak-power-sensors/ Mon, 24 Jul 2023 13:10:12 +0000 https://www.egerate.com/?post_type=product&p=19201 Model Frequency Range Dynamic Range Overload Rating Sensor Response Maximum SWR Impedance Connector (Low Bandwidth) Peak Pwr Rng** CW Pwr Rng Int. Trigger Range Pulse/Continuous Fast Risetime (Bandwidth) Slow Risetime (Bandwidth) Frequency SWR @ 0 dBm For use with models 4500B, 4540 and 4530* 57006 50 ohm N (M) 0.5 – 6 GHz (0.05 – [...]

The post Wideband Peak Power Sensors first appeared on EgeRate Elektronik.

]]> Model Frequency Range Dynamic Range Overload Rating Sensor Response Maximum SWR Impedance
Connector (Low Bandwidth) Peak Pwr Rng**
CW Pwr Rng
Int. Trigger Range Pulse/Continuous Fast Risetime (Bandwidth) Slow Risetime (Bandwidth) Frequency SWR @ 0 dBm For use with models 4500B, 4540 and 4530* 57006
50 ohm
N (M) 0.5 – 6 GHz
(0.05 – 6 GHz) -50 to +20 dBm
-60 to +20 dBm
-40 to +20 dBm 1 W for 1µs
200 mW <7 ns
(70 MHz typical) <10 µs
(350 kHz) 0.05 – 6 GHz 1.25 59318
50 ohm
N (M) 0.5 – 18 GHz
(0.05 – 18 GHz) -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <10 ns
(50 MHz typical) <10 µs
(350 kHz) 0.05 – 2 GHz
2 – 16 GHz
16 – 18 GHz 1.15
1.28
1.34 59340
50 ohm
K (M) 0.5 – 40 GHz
(0.05 – 40 GHz) -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <10 ns
(50 MHz typical) <10 µs
(350 kHz) 0.05 – 4 GHz
4 – 38 GHz
38 – 40 GHz 1.25
1.65
2.00 For use with models 4400, 4500, 4400A, and 4500A analyzers. Model 4530 w/1 GHz calibrator Model 2530 56318
50 ohm
N (M) 0.5 – 18 GHz -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <15 ns
(35 MHz) <200 ns
(1.75 MHz) 0.5 – 2 GHz
2 – 16 GHz
16 – 18 GHz 1.15
1.28
1.34 56326
50 ohm
K (M) 0.5 – 26.5 GHz -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <15 ns
(35 MHz) <200 ns
(1.75 MHz) 0.5 – 2 GHz
2 – 4 GHz
4 – 18 GHz
18 – 26.5 GHz 1.15
1.20
1.45
1.50 56518
50 ohm
N (M) 0.5 – 18 GHz -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <300 ns
(1.16 MHz) 0.5 – 2 GHz
2 – 6 GHz
6 – 16 GHz
16 – 18 GHz 1.15
1.20
1.28
1.34 For use with models 4400, 4500, 4400A, 4500A, 4500B, 4530 and 4540 57518
50 ohm
N (M) 0.1 – 18 GHz
(0.05 – 18 GHz) -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <10 µs
(350 kHz) 0.05 – 2 GHz
2 – 16 GHz
16 – 18 GHz 1.15
1.28
1.34 57540
50 ohm
K (M) 0.1 – 40 GHz
(0.05 – 40 GHz) -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <10 µs
(350 kHz) 0.05 – 4 GHz
4 – 38 GHz
38 – 40 GHz 1.25
1.65
2.00 For use with 4500, 4400, and 4530 56218
50 ohm
N (M) 30 MHz – 18 GHz -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <150 ns
(3 MHz) <500 µs
(700 kHz) 0.03 – 2 GHz
2 – 6 GHz
6 – 18 GHz 1.15
1.20
1.25 For use with 4500 and 4400 56526
50 ohm
K (M) 500 MHz – 26.5 GHz -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <300 µs
(1.16 MHz) 0.03 – 2 GHz
2 – 6 GHz
4 – 18 GHz
18 – 26.5 GHz 1.15
1.20
1.45
1.50

*4530 support only sw version 20070215 and later.
**For pulse signals only.

The post Wideband Peak Power Sensors first appeared on EgeRate Elektronik.

]]>