The practical biconical antennas of the BicoLOG® Antenna-Series are the perfect tool for performing economic and still highly accurate measurements in the lower frequency range down to 20 MHz.

These radial-isotropic-antenna are already delivered with typical, extensive calibration data in order to facilitate calibration for various measurement systems. The high-quality measurement-antennas of the BicoLOG® series are very light-weight and as such perfectly suited for mobile application, as well as usage in the laboratory.
Every BicoLOG®-Antenna has a high-grade SMA connector.
Devices, like Spectrum Analyzer, with N connector can be used with our optional, top-quality adapter.

Highlights:
• Only a single broadband antenna for the complete frequency range from 50 MHz up to 700 MHz
• Optimal for usage with spectrum analysers for EMC measurement
• Suitable for mobile use
• Robust design
• Small weight and dimensions
• Made in Germany

The post 5070
BicoLOG first appeared on EgeRate Elektronik.

The excellent performance data of the HyperLOG® PRO antenna series can be impressively underpinned by an optional measurement certificate with a large number of measurement points. The HyperLOG® PRO antennas are therefore especially predestined as high-quality measurement antennas for the laboratory, but also for portable measurements or as DF antennas.

Each HyperLOG PRO antenna is extensively measured in our laboratories before delivery. The high-tech housing (radome) is designed to protect against mechanical damage and environmental influences and can optionally be delivered as a waterproof version (IP65) for outdoor applications. Additionally, a high-quality 1/4″ thread for tripod mounting is integrated.

All HyperLOG® PRO 18xxx antennas have a 2.92mm K-connector with anti-rotation protection for highest precision while being suitable for practical use.

In addition to use as a high-quality measuring and direction finding antenna, use as a broadband transmitting antenna is also possible without any problems.

• Only one EMC broadband antenna for the entire frequency range from 2 to 25 GHz
• Ideal for use with a spectrum analyzer for EMV measurements
• Including high-tech radome with a modern, attractive design
• Polarization planes can be aligned as required
• Excellent front/rear ratio
• Excellent symmetry of radiation patterns
• Integrated 1/4″ tripod connection
• Suitable for mobile use
• Suitable for outdoor installation
• Capable of bearing
• Robust design
• Splashproof
• Light weight and dimensions
• Made in Germany

The post PRO 18250
HyperLOG first appeared on EgeRate Elektronik.

The HyperLOG® X BPA series has a variety of special features:
All HyperLOG® X BPA antennas are equipped with an extremely low noise bypass preamplifier (typ. 1.4 dB). This means they can be operated either with an active preamplifier with integrated rechargeable battery (runtime approx. 3-4 hours or permanently via an enclosed power supply) or as a passive antenna. This allows very weak to extremely strong signals to be measured without conversion. The gain of the antenna could be increased to over 27 dBi (passive 5 dBi). The new HyperLOG® X BPA antennas are therefore probably the most universal LogPer DF antennas available on the market.

All HyperLOG® X BPA antennas are equipped with a special adapter on which, among other things, the stock ball compass or similar can be mounted.

Calibration & Standards:
The logarithmic periodic antennas of the HyperLOG® 70xx X BPA antenna series are suitable for interference field strength measurements. The special broadband characteristics allow measurements in the entire specified frequency range without switching. The antennas are suitable for measurements according to the following standards and methods: CISPR, VDE, VG, EN 55011, EN 55013, EN 55015, EN 55022.
Scope of delivery:
HyperLOG® 7060X BPA, Typical calibration data, Aluminum design carrying case with foam inserts, Stable and screwable pistol grip with mini tripod function, Aaronia special SMA key, Preamplifier with special battery and power supply.

Specifications:
• Design: ACTIVE directional logarithmic-periodic
• Frequency range: 700 MHz to 6 GHz
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 26 dBi (typ.)
• Antenna factor: 23-34 dB/m
• RF connection: SMA (f) or N (see optional adapter)
• Tripod connection: 1/4″
• Ultra low-noise 22 dB preamplifier with special battery and power supply
• Calibration points: 181 (10MHz-steps)
• Dimensions (L/W/D): 340x200x25 mm
• Weight: 270g

The post 7060X BPA
HyperLOG first appeared on EgeRate Elektronik.