This case includes the 8K Fox & Hound Test and Troubleshooting Kit. This 40Gbps Generator and Analyzer Testing Kit from Murideo was built as the ideal testing unit for all custom and commercial integrators. These tools allow you to confirm correct bandwidth, HDCP, resolution, timing, HDR metadata and many more options that could cause system hiccups if not treated correctly.

Also included is the MSTest Pro, the only HDBaseT tester that is reliable, portable, and affordable, making it an indispensable tool for all manufacturers, installers, and integrators. This unique testing device provides A/V professionals with all the information they need when testing HDBaseT products.

Every Murideo HDBaseT tester consists of a main unit, Rx module, and Tx module. By emulating an HDBaseT transmitter or receiver, operating up to pixel rates of 300MHz, the tester is capable of testing 4K ultra-high definition source or sink devices even when installed up to 100 meters (328 feet) away.

Here is a breakdown of each of the included components for the Murideo HDBaseT Testing device:

MU-M4SOL-BASE
Battery-powered HDBaseT Tester/Analyzer featuring one HDBaseT 1.0 VS100 TX/RX Module and PoH adaptor. Includes Wireless AP for cord-free control and reporting.

Optional Units:
MU-M4SOL-MXNET
License upgrade allowing for the analysis of device addressing, SNMP, and IGMP information.

MU-M4SOL-2310
HDBaseT 2.0 VS2310 TX/RX Module with KVM extension testing.

MU-M4SOL-HCT
HDMI Cable Tester Module. Check presence of pins, wire gauge (AWG), and whether channels have been shorted or disconnected.

MU-M4SOL-DC
The DC Resistance module enables the checking of DC resistance unbalance both within, and between twisted pairs.

The post MU-FXHD-MSTEST-MIL
Milwaukee Packout Case first appeared on EgeRate Elektronik.

Professional acoustical analysis has never been simpler and more affordable. Designed by the Murideo and the Home Acoustics Alliance (HAA), this kit is everything you’ll need to provide high-value services and state-of-the-art results.

The Murideo Audio Calibration Kit Includes:

MUX-PRO: Four microphone multiplexer with low noise battery power and selectable microphone choices including multiplexing four high-quality microphones at your choice of the interval. Multiplexing provides the most accurate spatially averaged response data making hand equalization and auto-EQ verification simple and affordable.

Four EMM-6 High-Performance Microphones: These are type 2 microphones specifically designed for audio measurement. Rugged and accurate these microphones will transform your iPad into a state-of-the-art measurement tool.

iAI2 Microphone Preamplifier & Generator: Developed specifically for Studio Six Digital AudioTools this device allows your iPad or iPhone to work with our microphones and multiplexer. The IAI2 also includes a precision digital audio generator eliminating the need for test tone DVDs or a separate generator.

Murideo Custom Case: This attractive soft case unfolds conveniently exposing all items for immediate deployment. The case holds all the kit components plus has a pouch for your iPad, cables and other accessories.

Reed R8090 Sound Calibrator: The REED R8090 Sound Level Calibrator generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter. It complies with IEC 942 class 2. Simply place the calibrator on microphone, turn on and adjust your sound level meter.

25 Foot Optical Toslink Cable: Long range optical cable allows you to have flexibility from your workstation, feel free to move the kit around as you calibrate with the extra length.

Four Marked 25 Foot Microphone (XLR) Cables: These cables are neatly tucked away in the base of the Murideo Audio Calibration Kit. Saving you space and offering simple transport off all components. Additionally, you can easily move the microphones to various locations easily for better spatial sampling. The cable build is soft and flexible making it easy to deploy and wrap up after the job. The cables are marked so you can keep track of which mic the port is calibrated tool.

10 Foot Microphone XLR Lead for iAI2: There is a 10-foot lead to enable you to move the iAI2 around as well, place it on a desk or on the ground to save your workspace for other applications. The cable build is soft and flexible making it easy to deploy and wrap up after the job.

iAudioInterface2: Apple IOS Digital Pream/Interface A state of the art, Made for iPod, microphone preamp, iAI2 is the perfect companion for AudioTools and the Transfer Function module, for loudspeaker testing, and as a general-purpose audio tester. With an USB cable you can interact with iAudioInterface2 on your PC or Mac.

Tool Kit: You also get a kit of essential tools such as a screwdriver with over 30 different swappable heads.

The post MU-TEST-AUDIO
Audio Calibration Kit first appeared on EgeRate Elektronik.

As part of the Murideo testing and troubleshooting family, you know the standards are the highest in the industry. This monitor offers signal analyzer information such as resolution, color space, HDCP, HDR confidence, and audio type analysis.

Mount it locally in a rack for an extremely high-end, clean install. No matter how you use it, hunting down HDMI issues just got a lot easier with Murideo’s HDMI 4K Test Monitor.

The post MU-MON-DUAL
Murideo 4K HDMI Rack Mounted Dual Screen Test Monitor first appeared on EgeRate Elektronik.

Every Murideo MSTest Pro HDBaseT tester consists of a main unit, Rx module and Tx module. By emulating an HDBaseT transmitter or receiver, operating up to pixel rates of 300MHz, the tester is capable of testing 4K ultra-high definition source or sink devices even when installed up to 100 meters (328 feet) away.

Here is a breakdown of each of the options and components for the Murideo HDBaseT Testing device:

MU-M4SOL-BASE

• Battery powered HDBaseT Tester/Analyzer featuring one HDBaseT 1.0 VS100 TX/RX Module and PoH adaptor. Includes Wireless AP for cord free control and reporting.

MU-M4SOL-2310

• HDBaseT 2.0 VS2310 TX/RX Module with KVM extension testing.

MU-M4SOL-HCT

• HDMI Cable Tester Module. Check presence of pins, wire gauge (AWG), and whether channels have been shorted or disconnected.

MU-M4SOL-DC

• The DC Resistance module enables the checking of DC resistance unbalance both within, and between twisted pairs.

MU-M4SOL-UCT

• The USB Cable Test Module allows for integrators to gain a deeper understanding of their USB connectivity through qualification of the cabling used within installations.

The post MSTest Pro
Murideo’s HDBaseT Tester first appeared on EgeRate Elektronik.

Never again experience a feeling of hopelessness on-site when a relentless regimen of trial and error fails to resolve an inconsequentially simple setback.
The Murideo 8K Fox & Hound kit quickly tracks the origin of any conceivable in-field issue and short of device failure, leads you on the path to resolution. Simply put: If not in your tool kit, the 8K Fox & Hound should be on your wish list.

The 8K Fox & Hound On The Hunt:
Substitute the generator for a source device while also connecting the analyzer to the signal path leading into the display. The units will send and collect data that travels through system infrastructure. The Fox & Hound generator is capable of sending a pattern duplicating source resolution from 720p up to 8K. If the endpoint fails to display the sent signal, move the analyzer back through the device chain sequentially, until the chokepoint is discovered. With guesswork eliminated, time spent is specifically devoted to the solution, with verification in minutes.
​
It’s an old adage but wholly applicable: You can’t afford to be without an 8K Fox & Hound.

The post MU-FXHD-KIT-8K
8K & HDR Generator and Analyzer by Murideo first appeared on EgeRate Elektronik.

Beyond a conventional HDMI signal analyzer, if your professional world is HDMI-centric, the 8K SIX-A continues forward in Six Series footsteps as an invaluable analysis tool used worldwide by manufacturers, commercial and residential integrators as well as calibrators. Expanded comprehensive diagnostics are available when using the accompanying PC software.

• 40Gbps Support (Up to 8K60 4:2:0 or 8K30 4:4:4, 10 bit)
• HDMI 2.1a / FRL 5 (Fixed Rate Link) analysis
• HDMI 1.4 – 2.0 TMDS (HDMI cable compliance)
• Dolby Vision, HDR, HDR10+ and HLG support
• HDMI Signal Loss (time-elapsed determinable monitored drop detection)
• Extensive EDID, HDCP and Audio Channel diagnostics

The post MU-SIX-A-8K
The 8K SIX-A: HDMI 2.1 Next-Gen 8K Signal Analyzer first appeared on EgeRate Elektronik.

The handheld device is portable thanks to a built-in battery and can generate over 100 different test patterns for setup, calibration, and troubleshooting. There’s a three-inch color display with simplified menus as well as free PC control software. The 8K SIX-G also features Hot Plug Detect, EDID read/write functionality, and the ability to create custom resolutions. There’s the option for either RS232 or USB control and support for Calman and Light Illusion calibration software. The 8K SIX-G is the only unit to carry the complete suite of ISF test patterns, select-able color output level, RGB Triplets, and Constant APL (Average Picture Level) all in one place. The 8K SIX-G is a calibrator’s dream because it’s: ISF Labs certified, the firmware is field upgradable, and it even includes audio confidence tests.

Pair the 8K SIX-G with the 8K SIX-A Analyzer, and you have the most powerful HDMI system troubleshooting system on the planet! You can upload any image/pattern you want. The uploader will store the pattern in one of the ten available “slots” for recall later. It will even upload the thumbnail to the LCD screen. It supports .jpeg, .png, .bin and .bmp.

The post MU-SIX-G-8K
The 8K SIX-G: An HDMI 8K Signal Generator first appeared on EgeRate Elektronik.

​Sure, there are pricey test instruments available with a multitude of features. These devices together account for 99% of the testing those other products can do, and they do it in a point-to-point testing system allowing you to keep the SIX-G Generator in one room. Then, walk around all the displays with the 8K SIX-A Analyzer to find out what your system is doing or not doing.

The 8K Murideo Pair is a must-have for any HDMI Specialist, Calibrator, AV Product Manufacture, HDMI Cable Manufacturer, Custom/Commercial Integrators, Content Masters, and more.

The post MU-SIX-PAIR-8K
The 8K SIX-G and 8K SIX-A Field Test Suite first appeared on EgeRate Elektronik.

The impressive video capabilities of the SEVEN include native 10/12 Bit BT2020 video output with over 1000 patterns, including HDR, SDR, Dolby Vision, and HLG. Test patterns are generated from FPGA or raw YUV files for a truly native experience and include video playback. The SEVEN includes the full suite of patterns from Diversified Video Solutions and other patterns and videos from Bill Wetzel, ISF, PVA, Portrait Displays, and Spears & Munsil. This device is the ideal solution for display calibration and evaluation. The test suite allows the user to construct a test signal with any video format and any audio format, then execute a test based on your own parameters and allows for reporting. The device has 1.5TB of storage, with reservations for up to 3 minutes of 4K60 4:4:4 video playback so the user can quickly load patterns using the USB 3.0 interface. The SEVEN is also capable of 120 frame video playback.

The impeccable performance in video generation is just the beginning. As a test device approved by Dolby Laboratories, Inc., SEVEN was designed with advanced audio testing capabilities, including A/V Sync (Lip Sync), Audio Latency, and Dolby Audio. This approved test device for Dolby Audio contains all current Dolby Audio streams, including; Dolby Digital, Dolby Digital Plus (w/Dolby Atmos), Dolby MAT (Dolby Atmos), and Dolby True HD (w/ Dolby Atmos). The Audio Suite of tests is available in HDMI Tx, ARC Tx, and eARC Tx. With additional features like tone generation, frequency sweeps, AV Sync measurements, audio latency measurements, this is an audio swiss army knife. The built-in photo-diode sensor and microphone allow you to get real-time sync and latency measurements from HDMI and ARC/eARC.

Enjoy complete control, speed, and versatility with simple haptic controls from the front keypad with clear results on the large 7″ HD Screen. Control is even easier in the lab with the internally hosted Web Interface when connected to a local area network. IP and device addresses can be updated so multiple units can be in the same place, on the same network, and be independently controlled.

The post MU-GEN-SEVEN
The Seven Generator first appeared on EgeRate Elektronik.

Meticulously engineered with runaway ambition, the Imaging Science Foundation certified 8K SEVEN has an arsenal of more than 1,000 patterns, FPGA-generated or uncompressed YUV files, from industry testing and calibration industry leaders such as Diversified Video Solutions, ISF, Portrait Displays, PVA, Sony Pictures, Spears & Munsil, and Bill Wetzel. SDR, Dolby Vision, HDR10 and HLG patterns also include BT.2020 native 10bit & 12 bit content, making the 8K SEVEN the consummate display calibration or A/V evaluation instrument. Users may choose to construct custom test signals combining any video format with any audio format and use reporting functions to log results or perform more intrinsic test tracking with included protocol analyzation. Through the USB 3.0 interface, up to 3 minutes of 4K/60 4:4:4 motion playback may be user-uploaded. Playback at 120fps (@1080p) is also available from the 8K SEVEN.

Phenomenally well-sorted video generation is not the only attribute crafted into the 8K SEVEN. Unmatched attention to detail, maintaining exacting audio standards, was equally adhered to as would be expected from a Dolby Laboratories approved test device. Audio tests include A/V Synchronization, Latency Offset and all Dolby Audio streaming codecs: Dolby Digital, Dolby Digital Plus (w/Atmos), Dolby MAT (w/Atmos) , and Dolby TrueHD (w/Atmos). Audio tests can be transmitted via HDMI and eARC, with ARC supporting LPCM 5.1 & 7.1, Dolby Digital, and Dolby Digital Plus (w/Atmos). A built-in photodiode sensor with microphone enable real-time sync and latency measurements from HDMI, eARC, and ARC.

A bright, easy to read large 7” 1080p LCD screen crisply illuminates the 8K SEVEN’s data pages and test results. Simple keypad touchpoints enable easy menu navigation, preset and shortcut selections and provide media control. When connected to a local area network, the built-in Web Interface provides more accessible device control, including management of multiple units on the same network while retaining individual control.

Calibration specialists and seasoned video professionals of all stripes will find the Murideo 8K SEVEN to be a brilliantly executed mature product, wrapped in an elegant industrial design equipped with a compelling array of practical features, finally laying to rest the arguments and perceptions of the past that high-precision test instrumentation must sport esoteric pricing to bear the hallmark of authenticity.

The post MU-GEN-SEVEN-G8K
The 8K Seven Generator first appeared on EgeRate Elektronik.