Measure rotational torque of finished parts during assembly of equipment with rotating function.
As the output shaft self-rotates, catch load fluctuation of the rotating body by built-in sensor.
It can be measured rotational start torque of the rotated body (not rotating itself, no power) and load torque during rotation.
(Printer, copy machine, zooming lens, door knob mechanism, hinge mechanism etc ...)

Measure how much force the screw is tightened.
Enable to measure the torquevalue of tightened screw by grasping the occurrence of slippage accurately and measuring the torque.
For sampling inspection and setting&managing Output Torque of power driver.

Easy connection! It corresponds to various electric drivers equipped with screw tightening completion signal.
Mmanage the number of screw tightening, and prevent workers' poor mistake.
*There is an electric driver/tool that can not be applied for. Also, it may be necessary to change some settings in case of use. Please contact us for details.
Enable to check Qty by sound and light, and to perform more accurately and efficiently due to various function such as counting only action fastening screw successfully with the timer function.

The wrench head part can rotate about 300 degrees! The eyes and the display board can be always parallel and improves operability.
Lightweight and compact with integrated display !
Cordless type and improves operability. Enable to stably measure for long continuous use.Screw tightening counter function is also installed as standard.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

Lightweight and compact with integrated display !
For checking torque of the small screw of M0.8 ~ M2.0. Checking the starting torque of the rotating body such as volume & hinge.
In order to reduce the influence of the pressing force, the weight of the main unit was minimized to about 180.
Screw tightening counter function is also standard installed.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

Lightweight and compact with integrated display !
Cordless type and improves operability. Enable to stably measure for long continuous use.
Screw tightening counter function is also installed as standard.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

Idling type Torque Driver which enable to count Qty of Torque and tightened number by tightening with clicking noise.
When the torque is reached certain value, the clutch is automatically disengaged and idling, so there is no worry of over tightening.

Separate type digital torque driver wrench. The detection part is very compact and suitable for measuring lower torque & torque in a narrow place.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

Since display is equipped as with LED, you can clearly read the value even in a dark place.
Enable to measure anywhere because it is integrated type and compact.

High accuracy, and portable. It is installed on the work line and is effective for periodic inspection of the tool.
The blow counter displays number of blows and value of torque, and LED display which is brighter and easier to read.
Besides, it can be used for the management of the torque wrench · nut runner.