BOONTON - EgeRate Elektronik https://www.egerate.com Thu, 07 Sep 2023 12:32:30 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://www.egerate.com/wp-content/uploads/2022/03/cropped-logo-2-32x32.png BOONTON - EgeRate Elektronik https://www.egerate.com 32 32 1121A Audio Analyzer https://www.egerate.com/urun/pro-av/others/generator-and-analyzer/1121a-audio-analyzer/ Mon, 24 Jul 2023 14:38:32 +0000 https://www.egerate.com/?post_type=product&p=19216 The Model 1121A audio analyzer provides fast, accurate measurements including frequency, AC or DC level, distortion, SINAD and signal-to-noise ratio. It also includes an audio source providing accurate low distortion signals over wide frequencies and level ranges.

The post 1121A
Audio Analyzer first appeared on EgeRate Elektronik.

]]> Quick Features

  • Frequency range from 10 Hz to 200 kHz
  • Low-distortion audio source for testing systems, amplifiers, receivers and components
  • Measures AC/DC level, distortion, SINAD, S/N, frequency
  • Ten readings per second
  • 50-, 150- and 600-ohm output impedances
  • 300 B5V full-scale range sensitivity
  • 70 dB Common Mode Rejection Ratio
  • Sweeps frequency or level
  • Non-volatile memory for instant recall of up to 99 complete front-panel setups
  • IEEE-488 interface

The post 1121A
Audio Analyzer first appeared on EgeRate Elektronik.

]]> 8201A Modulation Analyzer https://www.egerate.com/urun/pro-av/others/generator-and-analyzer/8201a-modulation-analyzer/ Mon, 24 Jul 2023 14:29:01 +0000 https://www.egerate.com/?post_type=product&p=19214 The Model 8201A provides precision modulation and audio analysis in a single, easy-to-operate package. Measures AM, FM, PM, carrier and audio frequencies, SINAD, distortion and carrier level.

The post 8201A
Modulation Analyzer first appeared on EgeRate Elektronik.

]]> Quick Features

  • Carrier frequency range: 100 kHz to 2.5 GHz
  • 0 to 500 kHz FM deviation to 1% accuracy
  • 0 to 99% AM to 1% accuracy
  • 0 to 500 radians to 3% accuracy
  • Audio distortion range 0.01% to 100% THD or 0 to 80 dB SINAD
  • GPIB

The post 8201A
Modulation Analyzer first appeared on EgeRate Elektronik.

]]> 9240 RF Voltmeter https://www.egerate.com/urun/test-ve-olcu/elektriksel-olcum/multimetre/9240-rf-voltmeter/ Mon, 24 Jul 2023 14:18:19 +0000 https://www.egerate.com/?post_type=product&p=19212 The 9240 series is the latest addition to Boonton’s popular 9200 series of RF voltmeters. It combines accuracy, smart probes, and operator features that have never before been available in its price range. It is simple to use on the bench, and comprehensive enough to integrate into an ATE system. Boonton’s proven voltage probes directly measure from 200 μV to 10 V with usable indication as low as 50 μV and have true RMS response below 30 mV.

The post 9240
RF Voltmeter first appeared on EgeRate Elektronik.

]]> Quick Features

  • 10 Hz to 1.2 GHz measurement range*
  • Dual-channel and differential voltage measurements
  • 200 μV to 300 V measurement range
  • 1% accuracy at full scale
  • DC recorder output
  • IEEE-488 interface standard, RS-232

*Probe dependent

The post 9240
RF Voltmeter first appeared on EgeRate Elektronik.

]]> NGX1000 RF Noise Generators https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/sinyal-jeneratoru/ngx1000-rf-noise-generators/ Mon, 24 Jul 2023 14:12:38 +0000 https://www.egerate.com/?post_type=product&p=19210 The Boonton NGX1000 programmable noise generator is a high performance, broadband additive white gaussian noise (AWGN) generator in an easy-to-use compact form factor. The streamlined user interface and flat menu structure provides a fast, simple way to add RF noise in a communications system to test reliability, robustness and performance.

All functionality of the generator is accessible through the 5” touch screen or via remote control through an ethernet connection delivering flexible, programmable noise generation for broad use in semiconductor, military, aerospace, satellite, medical and communications applications.

The post NGX1000
RF Noise Generators first appeared on EgeRate Elektronik.

]]> Quick Features

  • White Gaussian noise output
  • Output power up to +10 dBm
  • 127 dB of attenuation; 0.1 dB step size
  • 5” touch screen display
  • Noise output through female N connector
  • Ethernet connection for remote control

The post NGX1000
RF Noise Generators first appeared on EgeRate Elektronik.

]]> SGX1000 RF Signal Generators https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/sinyal-jeneratoru/sgx1000-rf-signal-generators/ Mon, 24 Jul 2023 13:47:32 +0000 https://www.egerate.com/?post_type=product&p=19208 The SGX1000 series of RF signal generators offer high performance signal generation with an easy-to-use interface in a compact form factor. The SGX1000 utilizes a proprietary blend of direct digital and direct analog synthesis to provide ultra-fine frequency resolution, lightning-fast frequency switching, ultra-low phase noise and jitter, and superior reliability.

The signal generator incorporates an intuitive, multi-touch display that enables easy access and configuration to perform frequency and/or power sweeps to address a wide variety of test requirements.

The post SGX1000
RF Signal Generators first appeared on EgeRate Elektronik.

]]> Quick Features

  • Frequency range: 10 MHz to 18 GHz
  • Output power range: -50 to +18 dBm
  • 10/100 MHz reference input
  • Multi-touch, touchscreen
  • Lightning fast – Switching speed: 350µs (typ)
  • Ultra-low phase noise (3 GHz, 10 kHz offset) -122 dBc/Hz (typ)
  • Ultra-low jitter: 60 fs (typ)
  • Excellent amplitude accuracy (as low as -40 dBm): +/-0.5 dB (typ)

The post SGX1000
RF Signal Generators first appeared on EgeRate Elektronik.

]]> Average & CW Power Sensors https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/rf-guc-olcum-cihazi/average-cw-power-sensors/ Mon, 24 Jul 2023 13:13:51 +0000 https://www.egerate.com/?post_type=product&p=19204 Model Frequency Range Dynamic Range1 Overload Rating Maximum SWR Impedance Connector Pulse/Continuous Frequency SWR @ 0 dBm Wide dynamic range dual diode sensors 51075A 50 ohm N (M) 500 kHz to 18 GHz -70 to +20 dBm1 1 W for 1µs 300 mW 500 kHz – 2 GHz 2 GHz – 6 GHz 6 GHz [...]

The post Average & CW Power Sensors first appeared on EgeRate Elektronik.

]]> Model Frequency Range Dynamic Range1 Overload Rating Maximum SWR Impedance
Connector Pulse/Continuous Frequency SWR @ 0 dBm Wide dynamic range dual diode sensors 51075A
50 ohm
N (M) 500 kHz to 18 GHz -70 to +20 dBm1 1 W for 1µs
300 mW 500 kHz – 2 GHz
2 GHz – 6 GHz
6 GHz – 18 GHz 1.15
1.20
1.40 51077A
50 ohm
N (M) 500 kHz to 18 GHz -60 to +30 dBm1 10 W for 1µs
3 W 500 kHz – 2 GHz
2 GHz – 6 GHz
6 GHz – 18 GHz 1.15
1.20
1.40 51079A
50 ohm
N (M) 500 kHz to 18 GHz -50 to +40 dBm1 100 W for 1µs
25 W 500 kHz – 2 GHz
2 GHz – 6 GHz
6 GHz – 18 GHz 1.15
1.20
1.40 51071A
50 ohm
K (M) 10 MHz to 26.5 GHz -70 to +20 dBm1 1 W for 1µs
300 mW 10 MHz – 2 GHz
2 GHz – 4 GHz
4 GHz – 18 GHz
18 GHz – 26.5 GHz 1.15
1.20
1.45
1.50 51072A
50 ohm
K (M) 30 MHz to 40 GHz -70 to +20 dBm1 1 W for 1µs
300 mW 30 MHz – 4 GHz
4 GHz – 38 GHz
38 GHz – 40 GHz 1.25
1.65
2.00 Special purpose dual diode sensors 51011A-EMC
50 ohm
N (M) 10 kHz to 8 GHz -60 to +20 dBm2 1 W for 1µs
200 mW 10 MHz – 2 GHz
2 GHz – 4 GHz
4 GHz – 8 GHz 1.12
1.20
1.40 51011A
50 ohm
N (M) 100 kHz to 12.4 GHz -60 to +20 dBm2 1 W for 1µs
300 mW 100 kHz – 2 GHz
2 GHz – 4 GHz
4 GHz – 11 GHz
11 GHz – 12.4 GHz 1.12
1.20
1.40
1.60 Diode Average Sensor (For use with 4530, 5230, 4230, 4240, 4540) 51085
50 ohm
N (M) 500 kHz to 18 GHz -30 to +20 dBm1 15 W for 5 µs

2 W 500 kHz – 4 GHz
4 – 12.4 GHz
12.4 – 18 GHz 1.15
1.20
1.25 51086
50 ohm
K (M) 50 MHz to 26.5 GHz -30 to +20 dBm1 15 W for 5 µs

2 W 500 kHz – 18 GHz

18 – 26.5 GHz

  1.3

1.35

1 Models: All power meters except 4500B model
2 Models 4240, 4530, 4540

The post Average & CW Power Sensors first appeared on EgeRate Elektronik.

]]> Wideband Peak Power Sensors https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/rf-guc-olcum-cihazi/wideband-peak-power-sensors/ Mon, 24 Jul 2023 13:10:12 +0000 https://www.egerate.com/?post_type=product&p=19201 Model Frequency Range Dynamic Range Overload Rating Sensor Response Maximum SWR Impedance Connector (Low Bandwidth) Peak Pwr Rng** CW Pwr Rng Int. Trigger Range Pulse/Continuous Fast Risetime (Bandwidth) Slow Risetime (Bandwidth) Frequency SWR @ 0 dBm For use with models 4500B, 4540 and 4530* 57006 50 ohm N (M) 0.5 – 6 GHz (0.05 – [...]

The post Wideband Peak Power Sensors first appeared on EgeRate Elektronik.

]]> Model Frequency Range Dynamic Range Overload Rating Sensor Response Maximum SWR Impedance
Connector (Low Bandwidth) Peak Pwr Rng**
CW Pwr Rng
Int. Trigger Range Pulse/Continuous Fast Risetime (Bandwidth) Slow Risetime (Bandwidth) Frequency SWR @ 0 dBm For use with models 4500B, 4540 and 4530* 57006
50 ohm
N (M) 0.5 – 6 GHz
(0.05 – 6 GHz) -50 to +20 dBm
-60 to +20 dBm
-40 to +20 dBm 1 W for 1µs
200 mW <7 ns
(70 MHz typical) <10 µs
(350 kHz) 0.05 – 6 GHz 1.25 59318
50 ohm
N (M) 0.5 – 18 GHz
(0.05 – 18 GHz) -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <10 ns
(50 MHz typical) <10 µs
(350 kHz) 0.05 – 2 GHz
2 – 16 GHz
16 – 18 GHz 1.15
1.28
1.34 59340
50 ohm
K (M) 0.5 – 40 GHz
(0.05 – 40 GHz) -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <10 ns
(50 MHz typical) <10 µs
(350 kHz) 0.05 – 4 GHz
4 – 38 GHz
38 – 40 GHz 1.25
1.65
2.00 For use with models 4400, 4500, 4400A, and 4500A analyzers. Model 4530 w/1 GHz calibrator Model 2530 56318
50 ohm
N (M) 0.5 – 18 GHz -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <15 ns
(35 MHz) <200 ns
(1.75 MHz) 0.5 – 2 GHz
2 – 16 GHz
16 – 18 GHz 1.15
1.28
1.34 56326
50 ohm
K (M) 0.5 – 26.5 GHz -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <15 ns
(35 MHz) <200 ns
(1.75 MHz) 0.5 – 2 GHz
2 – 4 GHz
4 – 18 GHz
18 – 26.5 GHz 1.15
1.20
1.45
1.50 56518
50 ohm
N (M) 0.5 – 18 GHz -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <300 ns
(1.16 MHz) 0.5 – 2 GHz
2 – 6 GHz
6 – 16 GHz
16 – 18 GHz 1.15
1.20
1.28
1.34 For use with models 4400, 4500, 4400A, 4500A, 4500B, 4530 and 4540 57518
50 ohm
N (M) 0.1 – 18 GHz
(0.05 – 18 GHz) -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <10 µs
(350 kHz) 0.05 – 2 GHz
2 – 16 GHz
16 – 18 GHz 1.15
1.28
1.34 57540
50 ohm
K (M) 0.1 – 40 GHz
(0.05 – 40 GHz) -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <10 µs
(350 kHz) 0.05 – 4 GHz
4 – 38 GHz
38 – 40 GHz 1.25
1.65
2.00 For use with 4500, 4400, and 4530 56218
50 ohm
N (M) 30 MHz – 18 GHz -24 to +20 dBm
-34 to +20 dBm
-10 to +20 dBm 1 W for 1µs
200 mW <150 ns
(3 MHz) <500 µs
(700 kHz) 0.03 – 2 GHz
2 – 6 GHz
6 – 18 GHz 1.15
1.20
1.25 For use with 4500 and 4400 56526
50 ohm
K (M) 500 MHz – 26.5 GHz -40 to +20 dBm
-50 to +20 dBm
-27 to +20 dBm 1 W for 1µs
200 mW <100 ns
(6 MHz) <300 µs
(1.16 MHz) 0.03 – 2 GHz
2 – 6 GHz
4 – 18 GHz
18 – 26.5 GHz 1.15
1.20
1.45
1.50

*4530 support only sw version 20070215 and later.
**For pulse signals only.

The post Wideband Peak Power Sensors first appeared on EgeRate Elektronik.

]]> CPS2000 True Average Connected Power Sensors https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/rf-guc-olcum-cihazi/cps2000-true-average-connected-power-sensors/ Mon, 24 Jul 2023 12:57:22 +0000 https://www.egerate.com/?post_type=product&p=19199 CPS2000 True Average Connected Power Sensors provide USB, LAN and PoE capabilities to enable easy RF power measurement of modulated and CW signals from 50 MHZ to 8 GHz. Compatible with Windows and Linux systems, CPS2000 sensors include all the necessary drivers for programming through SCPI, IVI and LabVIEW. Connectivity and compatibility, combined with 60 dB dynamic range and 100 measurements per second, CPS2000 sensors are the ideal solution for lab, field, production test, ATE, remote monitoring and embedded environments.

The post CPS2000
True Average Connected Power Sensors first appeared on EgeRate Elektronik.

]]> Quick Features

  • 50 MHz to 8 GHz frequency range
  • -40 dBm to + 20 dBm dynamic range
  • True average power measurements for CW and modulated signals
  • USB and LAN (with PoE) connectivity
  • SCPI, IVI and LabVIEW programming
  • Windows and Linux compatibility
  • >100 measurements per second
  • Streamlined user interface for fast, accurate measurements

The post CPS2000
True Average Connected Power Sensors first appeared on EgeRate Elektronik.

]]> RTP4000 Real-Time True Average Power Sensors https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/rf-guc-olcum-cihazi/rtp4000-real-time-true-average-power-sensors/ Mon, 24 Jul 2023 12:49:08 +0000 https://www.egerate.com/?post_type=product&p=19197 RTP4000 true average power sensors provide 80 dB dynamic range and a frequency range down to 4 kHz. Built with Boonton's Real-Time Power ProcessingTM, these sensors deliver 100,000 measurements per second, virtually no gaps in signal acquisition and zero measurement latency. Combining this performance with pulse profiling, capture and measure of pulsed, CW and modulated signals, multi-channel capabilities and documentation tools, RTP4000 average power sensors are the ideal instrument for fast, accurate and reliable RF power measurements.

The post RTP4000
Real-Time True Average Power Sensors first appeared on EgeRate Elektronik.

]]> Quick Features

  • 4 kHz to 6 GHz and 10 MHz to 6/18 GHz sensors
  • -60 dBm to +20 dBm dynamic range
  • Pulse, Average, CW and Modulation modes
  • True average measurements with essentially no modulation bandwidth limitations
  • 175 kHz video bandwidth for pulse profiling
  • Real-Time Power Processing™ technology for virtually no gaps in signal acquisition and zero measurement latency
  • 100,000 measurements per second
  • Synchronized multi-channel measurements
  • Boonton Power Analyzer: Suite advanced measurement and analysis software

Real-Time Power Processing

Real-Time Power Processing (RTPP) technology is a unique parallel processing methodology that performs the multi-step process of RF power measurement at incredible, unmatched speeds. While conventional power meters and USB sensors perform steps serially, resulting in have long re-arm times and missed data Boonton sensors with RTPP capture, display and measure every pulse, glitch and detail with virtually no gaps in data and zero latency.

The post RTP4000
Real-Time True Average Power Sensors first appeared on EgeRate Elektronik.

]]> RTP5000 Real-Time Peak USB Power Sensors https://www.egerate.com/urun/test-ve-olcu/gelismis-olcum/rf-guc-olcum-cihazi/rtp5000-real-time-peak-usb-power-sensors/ Mon, 24 Jul 2023 11:50:26 +0000 https://www.egerate.com/?post_type=product&p=19193 Providing the highest video bandwidth and fastest rise times, RTP5000 peak USB power sensors with Boonton’s Real-Time Power ProcessingTM deliver 100,000 measurements per second, no gaps in signal acquisition and zero measurement latency. Combining this performance with automatic pulse measurements, CCDF and crest factor statistical analysis, multi-channel capabilities and documentation tools RTP5000 peak power sensors are the ideal instrument for fast, accurate and reliable RF power measurements.

The post RTP5000
Real-Time Peak USB Power Sensors first appeared on EgeRate Elektronik.

]]> Quick Features

  • 6 GHz, 8 GHz, 18 GHz and 40 GHz RF Power Sensors
  • Up to 195 MHz video bandwidth with 3 ns rise time
  • Real-Time Power ProcessingTM technology with zero measurement dead time
  • 100,000 measurements per second
  • Power Analyzer Suite advanced measurement and analysis software
  • Crest factor, CCDF and statistical measurements
  • 10 GS/s effective sample rate
  • 100 MS/s continuous sample rate
  • Synchronized multi-channel measurements

Real-Time Power ProcessingTM

Real-Time Power ProcessingTM (RTPP) technology is a unique parallel processing methodology that performs the multi-step process of RF power measurement at incredible, unmatched speeds. While conventional power meters and USB sensors perform steps serially, resulting in have long re-arm times and missed data Boonton sensors with RTPPTM capture, display and measure every pulse, glitch and detail with no gaps in data and zero latency.

The post RTP5000
Real-Time Peak USB Power Sensors first appeared on EgeRate Elektronik.

]]>