TM-81/82/86/87/88
Autoranging Multimeter

This meter is in compliance with safety Standards EN 61010-1 related to electronic measuring instruments.

APPLICATION

  • This instrument has been designed for use in environments of pollution degree 2.
  • It can be used for  VOLTAGE measurements on installations of CAT III 1000V or CAT IV 600V.
  • Only the original test leads supplied along with the instrument guarantee compliance with the safety standards in force. They must be in a good conditions and, if necessary, replaced with identical ones.
  • Do not test nor connect to any circuit exceeding the specified overload protection.
  • Before connecting the test probes to the installation make sure that the rotary selector is positioned on the right function.
  • Make sure that LCD and rotary selector indicate the same function.

FEATURES

MODEL
TM-81
TM-82
TM-86
TM-87
TM-88
Backlit
•
•
•
•
Bargraph
•
•
 DC Voltage
•
•
•
 AC sine voltage
•
•
 DC Current
•
 AC sine wave Voltage
•
 AC sine wave Current
•
 DC and AC
TRMS Voltage
•
•
 DC and AC
TRMS Current
•
•
 Resistance
•
•
•
•
•
 Continuity test
•
•
•
•
•
 Diode test
•
•
•
•
•
 Temperature with
type K probe
•
 Duty cycle
•
 Frequency
•
•
•
 Capacitance
•
•
•
 Auto power off
•
•
•
•
•
 Range hold
•
•
•
•
•
 Data hold
•
•
•
•
•
 MAX
•
•
Max/Min
Max/Min
 Peak hold
•
•
 REL
•
•
•

SPECIFICATIONS

TECHNICAL
FEATURES
TM-81
TM-82
TM-86
TM-87
TM-88
Display
3½ LCD with max.
reading 1999 counts
+symbol and decimal point
3¾ LCD with max.
Reading 3999 counts
+symbol and decimal point
4 LCD with max.
reading 3999 counts
+symbol decimal point sign and barograph
Sampling rate
2.5/s
DC Voltage
0.1mV~600V
(0.8%+1)
0.1mV~600V
(0.8%+2)
0.1mV~1000V
(0.5%+2)
AC Voltage
0.001V~600V
(1.5%+3)
0.001V~600V
(0.8%+3)
AC TRMS Voltage
0.1mV~750V
(1.3%+5)
DC Current
0.01A~10A
(1.2%+3)
0.1µA~10A
(1.0%+3)
AC Current
0.01A~10A
(2.0%+5)
AC TRMS Current
0.1µA~10A
(1.5%+5)
Resistance
200Ω,2kΩ,20kΩ,
200kΩ,2MΩ,20MΩ
400Ω,4kΩ,40kΩ,400kΩ,4MΩ,40MΩ
Accuracy
±(1.0%+3)
±(1.0%+2)
±(1.0%+2)
Overload
protection
600V rms
1000V rms
Diode Test
√(1.5V)
Continuity Test
√
√
√
Continuity Test
√
√
√
√
√
Temperature
with K probe
-40°C~800°C
-40°F~1382°F
Accuracy
°C
(2.0%rdg + 3dgt)
°F
(2.0%rdg + 5dgt)
Temperature Use T10 adapter
and K-type probe
-40°C~80°C
-40°F~1382°F
Accuracy
°C
(2.0%rdg +3dgt)
°F
(2.0%rdg +5dgt)
Frequency
(Autorange)
0.01Hz~99.99KHz
1Hz~100KHz
Duty cycle
(Autorange)
20~80%
Capacitance
(Autorange)
5nF,50nF,500nF,
5µF,50µF,100µF
4nF,40nF,400nF,
4µF,40µF,400µF,4mF,40mF
Accuracy
±(3%+5)
±(1%+5)
ACCESSORIES
Adapter for connection type K probe -T10
Adapter for connection type K probe -T10

ACCESSORIES

  • User’s Manual
  • Test leads
  • 1.5V battery (AAA MN2400 LR03 AM4)(TM-81/82/86)
  • Adapter for connection type K probe-T10(TM-82/88)
  • Type K probe for complex  or any place hard to enter (-50~200°C/-58~392℉) – TP-03(TM-82/88)
  • 9 Volt battery(TM-87/88)
  • Carrying case

DOWNLOADS